Accessories

Telescope accessories
View as Grid List
Sort by
Display

This adapter allows you to connect accessories with M57 female thread to the ESATTO 3" focuser.

  • Focuser side connection: M81x1 thread (female)
  • Camera side connection: M57x1 thread (male)
  • Needs only 4 mm back focus
119.00 €
Estimated delivery time : 1-4 days
 
 

This adapter allows you to connect the ESATTO 3" focuser to the GSO/Orion/TPO Ritchey-Chrétien with 10, 12, 14 and 16 inches.

  • Telescope side connection for GSO/Orion/TPO Ritchey-Chrétien 10, 12, 14 and 16 inches
  • Focuser side connection specific for PrimaLuce ESATTO 3"
136.00 €
Estimated delivery time : 1-4 days
 
 

This adapter allows you to connect the ESATTO 3" focuser to the Takahashi telescope FSQ85.

  • Telescope side connection M72x1 thread (male) with stop ring for the Takahashi telescope FSQ85
  • Focuser side connection specific for PrimaLuce ESATTO 3"
103.13 €
Estimated delivery time : 1-4 days
 
 

Versatile Motor Focus from PrimaLucelab with adaption to many focusers

  • Outstanding precision of 0.7 microns/step
  • Compatible to a wide range of focusers, often without external brackets
  • Controlled by PC via USB-C (reversible) or tablet/smartphone via its own WiFi network
  • Motor and electronics are fully integrated into the casing
  • Dimmable status LEDs can even be turned off and are helpful at night
  • Compact dimensions of 87.5 x 60 x 43 mm
  • Included: configuration software with extensive control options, available via download
  • ASCOM driver allows control with all conventional astro software
    Works especially fine with the ARCO camera rotator
  • Can be supplied with a temperature probe for automatic focus correction
349.00 €
Estimated delivery time : 1-4 days
 
 

Temperature probe for the SESTO SENSO Motor Focus

  • Convenient jack plug for quick connection
  • Precise measurement of ambient temperature
  • Enables automatic focus adjustment to compensate temperature variance
  • Contrary to the image, the sensor has a straight plug, not an angled one.
39.00 €
Estimated delivery time : 1-4 days
 
 

SC 3.3? adapter for ESATTO 2" allows you to connect the ESATTO 2" focuser to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models.

  • Telescope side connection 3.3" SC thread
  • Focuser side connection specific for PrimaLuce ESATTO 2"
  • Only 2 mm reduction of back focus
72.20 €
Estimated delivery time : 1-4 days
 
 

Thanks to the ESATTO 2" adapter for telescopes with SC thread, you can connect the ESATTO 2" to SC telescopes like the Celestron C6, C8, C9.25 and EdgeHD800.

  • Telescope side connection 2" SC thread
  • Focuser side connection specific for PrimaLuce ESATTO 2"
  • No reduction of back focus
41.20 €
Estimated delivery time : 1-4 days
 
 
This adapter allows the connection of the Primalucelab SESTOSENSO 2 Motorfocus to focusers with 33 mm shaft diameter.
92.00 €
Estimated delivery time : 1-4 days
 
 
Lightweight and flexible dovetail bar with slotted holes, countersunk hole and 1/4" photo thread
48.00 €
Estimated delivery time : 1-4 days
 
 

Two adapters in one

The projection and focal adapter consists of two parts - the projection part and the focal adapter. The projection part is used with an eyepiece for achieving a long focal length with small objects, e.g. for individual craters. Use the focal adapter without the use of an eyepiece so employing the focal length of your telescope - for taking photos of the entire Moon, gas nebula or galaxy.

  • projection adapter for 1.25-inch eyepieces of up to 38mm outside diameter
  • can be used as a focal adapter with a T2 thread
  • continuous zoom - magnify the image by sliding the adapter further out

 

34.90 €
Estimated delivery time : 3-4 days
 
 
Aluminium tube clamps for tubes D=176mm
59.00 €
Estimated delivery time : 1-4 days
 
 
Rowan AZ100 Altitude Adjuster
199.00 €
Estimated delivery time : 1-4 weeks