TS Optics

• 3/8" photo thread at the top - suitable for all mounts with a flat bottom and 3/8" internal thread
• Also suitable for ball heads and tilt heads
• Suitable for piers with an inner diameter of 93.5 mm, such as the TSPIER piers
• Distance of the three fastening screws on the pier from the stop edge 16.5 mm
• With 3/8" photo screw
• Made of aluminium - black anodized

• Suitable for Skywatcher mounts EQ3, EQM35, EQ5, AZ-EQ5, HEQ5
• Suitable for Vixen GP mounts
• Suitable for Bresser Mon2 mounts
• Suitable for piers with the inner diameter of 93.5 mm
• Outer diameter of the support plate 100.5 mm
• Distance of the three fixing screws on the column from the stop edge 16.5 mm
• With fixing screw for the mounting and the spigot for the azimuth fine adjustment
• Solid aluminium

• Suitable for Skywatcher EQ6 and Celestron CGEM mounts
• Suitable for piers with an inner diameter of 93.5 mm, such as the TSPIER piers
• Distance of the three mounting screws on the pier from the stop edge 16.5 mm
• With fastening screw for the mount and the pin for azimuth fine adjustment
• Made of aluminium - black anodized
  

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

• Steel pillar - weatherproof
• Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
• The stabilisers can be easily removed from the column for easier transport
  Height 1000 mm
• Outer diameter 100 mm / wall thickness 5 mm
• Suitable mounting adapters are optionally available (see accessories)

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

• Steel pillar - weatherproof
• Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
• The stabilisers can be easily removed from the column for easier transport
  Height 1200 mm
• Outer diameter 100 mm / wall thickness 5 mm
• Suitable mounting adapters are optionally available (see accessories)

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

• Steel pillar - weatherproof
• Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
• The stabilisers can be easily removed from the column for easier transport
  Height 500 mm
• Outer diameter 100 mm / wall thickness 5 mm
• Suitable mounting adapters are optionally available (see accessories)

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

• Steel pillar - weatherproof
• Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
• The stabilisers can be easily removed from the column for easier transport
  Height 700 mm
• Outer diameter 100 mm / wall thickness 5 mm
• Suitable mounting adapters are optionally available (see accessories)