TS Optics

The TS collimating telescope allows precise collimation of Ritchey-Chrétien, Cassegrain and Dall-Kirkham telescopes and can also be used for refractors.

• easy adaption with T2 thread
• integrated illumination with brightness control
• usage with alignment laser possible
• connection of a camera possible
• two eyepieces included
• adapters to M90 and M117 available
• suitable for RC-, Cassegrain- and Dall-Kirkham-telescopes as well as refractors

Notes:

The Photoline corrector is optimized for the TS 85 mm f/6 APO and ED refractor telescopes and corrects the field of view for astrophotography up to full frame format.

• Shortening factor 0.92x
• Connection telescope side: M63x1 male thread
• Connection camera side: M48x0.75 male thread
• Working distance: 55 mm from the connection thread
• ED design for good correction on axis and in the field
• The corrector is optimized for all refractors with 85 mm aperture and f/6, but it will also give good results with similar telescopes.

The corrector is optimized for the TS 96 mm f/6 APO and ED refractor telescopes and corrects the field of view for astrophotography up to full frame format.

• Shortening factor 0.92x
• Connection telescope side: M63x1 male thread and M70x1 male thread
• Connection camera side: M48x0.75 male thread
• Working distance: 55 mm from the connection thread
• ED design for good correction on axis and in the field
• The corrector is optimized for all refractors with 96 mm aperture and f/6, but it will also give good results with similar telescopes.

The TS Photoline 1.0x full-frame flattener corrects the field of view of refractor telescopes and allows astrophotography with perfect edge sharpness

• Full illumination and correction of the image field up to 55 mm sensor diameter
• Factor 1.0x, the focal length remains unchanged.
• Suitable for all refractor telescopes with focusers from 2.5" upwards
• No reflections and ghost images due to high quality coating and anti-reflection thread
• Connections at the telescope side M68x1 male thread and M63x1 male thread (reducing adapter)
• Connections at the camera side M48x0.75 male thread with adaption for 2" filter
• Practical working distance of 55 mm from M48 thread (can be extended to 88 mm)
• Refractors require a working distance of at least 145 mm from the M68 or M63 female thread.