TS Optics Quick filter changer for 50mm and 50.4mm unmounted filter - only 10mm optical length
The filter quick changer for extreme solutions if you have nearly no
space - the changer is made for unmounted filters with D=50,4mm (z.B. Baader) or D=50mm (z.B. Astronomik oder Astrodon).
Advantages-
there is no limit to the number of different filters you can use.
-
very very low profile
-
this also results in best possible field illumination
-
the filter quick changer needs less space than e.g. a filter wheel
-
the filters currently not in use can be stored protected from dew and
dust. In classical filter drawers the filters are completely
unprotected!
Short M48 female connection thread
The M48 female
connection thread is very short - if your connection adapter has a
longer M48 thread, you will need M48 fine tuning rings. If the connection
thread goes too deep into the filter changer, the drawer will be
blocked, you cannot move it.
Off axis guidingThe TS filter quick changer in
combination with the TS Off Axis Guider TSO-TSOAG9 is a very short solution for guiding.
Delivery contents-
Filter quick changer with one filterdrawer for 50mm and 50.4mm unmounted filters
Products specifications
|
Total length
|
10 mm |
|
Connection to telescope
|
M48x0.75 female thread (2" filter thread) |
|
Diameter
|
80 mm |
|
Weight
|
75 g |
|
Connection to camera
|
M48 thread (male) |
