TS Optics Stainless steel fine tuning ring for T2-thread - thickness 0.3 mm They
allow fine adjustment of the distance with much higher precision than
with T2 extension tubes. Furthermore, in most cases the stability is
higher than with variable extension tubes.
In contrast to plastic
tuning rings, a clean support is always guaranteed with metal rings.
They can always be removed, even at low temperatures.
Applications - Optimizing the distance between camera and corrector
- Fine
tuning of extremely short distances of only a few millimeters, where
extension tubes are too long, due to their construction
- Male threads which are too long can be bridged, so that they are not a drawback anymore.
- Especially
fine threads tend to jam, they seize, and one cannot screw them apart
again. Often, the reason for this are improperly made last thread turns.
Through using the fine tuning ring, these thread turns are excluded,
the bearing gets more proper.
Delivery contents
Products specifications
|
material
|
stainless steel |
|
Suitable for
|
T2 thread |
|
Unobstructed inner diameter
|
42.1 mm |
|
Thickness
|
0.3 mm |
