TS Optics 0.5mm stainless steel fine tuning ring for M48 filterthread
Fine tuning rings from TS Optics are a real problem solutionThey allow fine adjustment of the distance with much higher precision than with M48 extension tubes. Furthermore, in most cases the stability is higher than with variable extension tubes.
In opposite to plastic tuning rings, a clean support is always guaranteed with metal rings. They can always be removed, too, even at low temperatures.
Applications of fine tuning rings- Optimizing the distance between camera and corrector
- Fine tuning of extremely short distances of only a few millimeters, where extension tubes are too long, due to their construction
- Male threads which are too long can be bridged, so that they are not a drawback anymore (like with the TS filter quick changer, where the male thread would block the drawer)
- Especially fine threads tend to jam, they seize, and one cannot screw them apart again. Often, the reason for this are improperly made last thread turns. Through using the fine tuning ring, these thread turns are excluded, the bearing gets more proper.
Delivery contents Products specifications
| material | stainless steel |
| Suitable for | M48 thread |
| Thickness | 0.5 mm |
| Unobstructed inner diameter | 49 mm (slips over the M48 thread) |
