CNC tube rings with elegant design and uncompromising quality from TS Optics
A beautiful telescope should be attached to the mount with the finest tube ring. Here, a beautiful appearance is as important as good technical properties. The CNC tube rings from TS meet these requirements.
-
The tube is attached to the mount or the dovetail via a largely dimensioned (40 mm) support surface.
-
The rings have identical support surfaces on top which allows attaching dovetail clamps or another dovetail bar.
-
The rings can be folded open, thus the telescope can be removed from them within seconds.
-
A thin layer of felt was applied to the inner side of the rings. This prevents from scratches. Nevertheless, the telescope tube is clamped very well in the rings and does not change position. This is important if a guiding scope is attached to the rings.
Delivery contents-
2x aluminium CNC tube rings
Products specifications
|
Connecting thread
|
One 1/4" thread (female) on top and bottom |
|
Thickness
|
18 mm |
|
material
|
Aluminium CNC machined, black anodized |
