TS Optics fine tuning ring for M54, thickness 1.5mm It allows fine adjustment of the distance with much higher precision than with extension tubes. Furthermore, in most cases the stability is higher than with variable extension tubes.
Opposite to plastic tuning rings, a clean support is always guaranteed with metal rings. They can always be removed, too, even at low temperatures.
Applications - Optimizing the distance between camera and corrector
- Fine tuning of extremely short distances of only a few millimeters, where extension tubes are too long, due to their construction
- Male threads which are too long can be bridged, so that they are not a drawback anymore (like with the TS filter quick changer, where the male thread would block the drawer)
- Especially fine threads tend to jam, they seize, and one cannot screw them apart again. Often, the reason for this are improperly made last thread turns. Through using the fine tuning ring, these thread turns are excluded, the bearing gets more proper.
Delivery contents
Products specifications
|
Unobstructed inner diameter
|
54mm |
|
Thickness
|
1.5mm |
|
material
|
Aluminum, black anodized |
|
Suitable for
|
M54x1 and M54x0.75 thread |
|
Diameter
|
60 mm |
