TS UNC 2" RAP focuser for Newtonian telescopes

The TS UNCN2-G2 focuser is optimized for Newtonian telescopes when heavy accessories need to be precisely focused. Especially for astrophotography this focuser is optimized. Therefore we recommend this focuser also for the ONTC and UNC Newtonian telescopes from our own manufacturing.

The advantages and product features of the UNCN2-G2 focuser:

• Highest rigidity - the drawtube is held by 8 ball bearings and the adjustment of the drawtube is done via gear drive
• 22 mm adjustment range via the gear drive
• The focuser holds up to 5 kg with full accuracy
  M54x0.75 intermediate thread for screw adaptations or if the drawtube needs to be extended, suitable extension tubes are available from us.
• One of the shortest focusers in its class with only 58 mm overall height up to 2" and only 50 mm overall height to the M54x0.75 thread when the drawtube is retracted
• Easy attachment to existing tubes, the base is included in delivery
• The focuser is not clamped by pressure on the drawtube, which can cause tilting. It is clamped by the adjustment shaft. This keeps the focus position at 100% without the risk of tilting, which is important for astrophotography
• 1:11 dual speed provides accurate manual adjustment, especially for fast telescopes this is a must.
• Motorized controls for the focuser are available.

Screw connection of correctors to the M54x0.75 thread of the focuser:
If the corrector is screwed to the focuser, tilting is prevented. Therefore, many astrophotographers attach great importance to this. We have developed a short adapter to M48x0.75 especially for this focuser, the # M54a-M48i. The adapter is only 3 mm short. It is linked in the accessories section.

• The coma correctors MPCC from Baader and TSGPU from TS-Optics have an additional M48 thread for screw adaptations. You can use these threads and have the full working distance of 55 mm available.
• However, you can also use other correctors with the short adapter # M54a-M48i, but the prerequisite is that the M48 thread on the camera side is at least 5 mm long. Then there is still enough thread left for the camera connection. Please take into account, however, that the working distance of the corrector is reduced by 3 mm.

Scope of Delivery:

• Focuser
• Base
• Adapter to 1.25" with dust cap
• Protective cover for fine adjustment