TS- Focuser
- Home /
- Mechanical Accessories /
- Focuser & Accessories /
- TS- Focuser
TS- Focuser
Fine adjustment with high precision, combined with little height.
139.00 €
Estimated delivery time : 1-4 days
Precise focusing of the camera lens and fixation of the position
89.00 €
Estimated delivery time : 1-4 days
Precise focusing of the camera lens and fixation of the position
99.00 €
Estimated delivery time : 1-4 days
Precise focusing of the camera lens and fixation of the position
79.00 €
Estimated delivery time : 1-4 days
Short 2" focuser for Newtonian telescopes with base for astrophotography and observation - with intermediate thread for screw adaptations
259.00 €
Estimated delivery time : 1-4 days
TS 2" Rack and Pinion RAP Focuser with SC Thread
299.00 €
Estimated delivery time : 4-8 weeks
The rack and pinion focuser is suitable for do-it-yourself construction or improvement of an 8" Newtonian telescope and also accepts correctors with 3" diameter.
- Suitable for telescope tubes with 230mm to 250mm diameter
- Including 360° rotation and tilting possibility
- 2" connection and auxiliary thread M82x1 (female) for adapting large correctors for astrophotography
- Micro-reduction for precise focusing
- The bearing of the extension tube is decoupled from the adjustment via gear drive (rack-and-pinion)
855.00 €
Estimated delivery time : 1-4 days
The rack and pinion focuser is suitable for do-it-yourself construction or improvement of a 10" Newtonian and also accepts correctors with 3" diameter.
- Suitable for telescope tubes with 230mm to 250mm diameter
- Including 360° rotation and tilting possibility
- 2" connection and auxiliary thread M82x1 (female) for adapting large correctors for astrophotography
- Micro-reduction for precise focusing
- The bearing of the extension tube is decoupled from the adjustment via gear drive (rack-and-pinion)
914.00 €
Estimated delivery time : 1-4 days
Stable 2" focuser with rack and pinion adjustment, speed
reduction and roller bearings for RC and Cassegrain telescopes with
M117x1 thread on the tube
Telescope connection: female M117x1 thread with 360° rotation Can also be attached to refractors via special adapter Connection on the eyepiece side is 2" and 1.25" M82x1 male thread, M77x1 female thread, M74x1 male thread and M69x1 female thread for screw adaptations Drawtube travel is 50 mm Bearing via stainless steel rail with ball bearings Adjustment via toothed rack - rack-and-pinion principle Suitable for EAF motorized focus without additional adapter
425.00 €
Estimated delivery time : 4-8 weeks
This focuser is more stable and more accurate than usual Crayford focusers. We recommend the focuser especially for astrophotography.
249.00 €
Estimated delivery time : 1-4 days
