Classy CNC Tube Rings with elegant design and uncompromising quality
A beautiful telescope should be attached to the mount with perfect tube rings, too. Here, a beautiful look is as much in demand as gut technical properties. The CNC tube rings fulfill these requirements.
-
The tube has only 8 mm distance to the bottom side of the rings, thus the mount is not additionally loaded by unnecessarily long levers.
-
The tubes have plane support surfaces on both sides with five female M6 threads on each side. 1 M6 thread in the middle, 2 M6 threads at a distance of 19 mm from
the middle, 2 M6 threads at a distance of 30mm from the middle. With this, you can easily attach dovetail bars and accessories.
-
With only 5 mm thickness, the rings are lightweight yet very stable
-
A thin layer of felt was put on the inside of the tube rings for avoiding scratches. However, the tube is clamped very well in the rings and does not change position. That is important if a guiding scope is attached to the rings.
Delivery contents-
Set of 2x Aluminium CNC Tube Rings
Products specifications
|
material
|
high quality machining (CNC) in aviation aluminum |
|
M6 thread bores
|
1x centered, 2x at a distance of 19 mm from the middle, 2x at a distance of 30mm from the middle |
|
Diameter
|
for tube diameters of 116 mm |
|
Thickness
|
20 mm |
