Tripods

.

- Mounting head made of wood - Minimum of metal components - Centre column eligible (wood or synthetic material), standard length 50 cm, with screw bolt 1/4" - Leg spread at an angle of about 27° - Feet made of synthetic material cap

Centre column 97 cm long made from GFK-tube with diameter 40 mm

- Mounting head made of wood - Minimum of metal components - Centre column eligible (wood or synthetic material), standard length 50 cm - Leg spread at an angle of about 27° - Feet made of synthetic material cap

- Mounting head made of wood - Centre column (diameter 40 mm) made of plastic, length 800 mm - Diameter plate: 60 mm

- For near-ground-level exposures - Camera plate (Ø 67 mm) can be unscrewed from the stainless steel rod - Length: 250 mm

This special stand is designed for the ring antenna HFH2-Z2E. It allows positioning the antenna at a height range of 989 to 1633 cm. The antenna can be rotated or tilted in all three dimensions, enabling measurements in any vibration direction. The four wheels facilitate quick relocation, while the four leveling axes secure the cart and ensure rapid leveling. [YOUTUBE LINK=https://youtu.be/2Mtp-h0-prI]

- Size: ca. 162 x 102 mm - last hole in the strap on 290 mm - base thread 1/4" and 3/8"

The ultimate binocular support deluxe from Berlebach leaves nothing to be desired. It connects binoculars securely to any photo tripod and allows precise panning and tilting of the binoculars. The 2-way panhead optimised for observation is completely integrated in the binocular support. This compactness guarantees maximum stability. The rubber cork-covered support surface to the binoculars is twice 100 x 65 mm and can be perfectly adjusted by simple adjustment by means of a knurled wheel in the range from 30° (for binoculars) to -15° (for monoculars). Vertically, the head has an angular freedom of 70° to -55° and the horizontal offers the usual 360° swivel. Both planes are each fixed via an adjustment element. The binoculars are attached by a 400 mm long rubber strap, which can be fixed to the side. Seven holes offer a wide range of adjustment for the respective optics. The bottom connection is a 68 mm plate optimised for Berlebach tripods with a 3/8? UNC threaded hole (by means of reduction also ¼? UNC). For zenith observations, we recommend a tripod with a tiltable and swiveling center column, such as Report 843 or Report 342.

Box for dia or negative rolls - dia. of the holes: 26mm /1" - max. high of the film: 50 mm / 2" - number of holes: 43 pcs.

Der Flexpin D5,0 x 5 ermöglicht Ihnen eine flexible verdrehsichere Positionierung der Wechselplatte an Ihrem Equipment. Er ist nur für Original Berlebach-Wechselplatten der Längen 117, 157 und 227 mm geeignet. Ideenstiftend waren hierfür die Swarovski-Spektive ATX/STX und ATS 65.

- Adapter with photo thread 1/4" or 3/8" for the Models astro-triopds. With this adapter you can use you astrotrpod for photo. diameter: 88 mm