Tripods

These innovative products offer an impressive combination of small packaged size, high load capacity and extremely good damping. 3-point clamping with the new clamps provides even greater rigidity and security. This means the tripod can take heavy loads despite the reduced diameter of the individual parts. Light-metal mounting head with spring-loaded retaining spindle. Diameter of the support area 160 mm. With leg spread stops at 20°, 35°, 55° and 80°.

These innovative products offer an impressive combination of small packaged size, high load capacity and extremely good damping. 3-point clamping with the new clamps provides even greater rigidity and security. This means the tripod can take heavy loads despite the reduced diameter of the individual parts. Light-metal mounting head with levelling ball up to 30° tilt and circular bubble. Ball with friction adjustment. Diameter of the support area 100 mm. Without leg spread stops. The maximum heights given below are those at an approx. 20° leg spread.

Light-metal mounting head with geared centre column and circular bubble. Centre column length is 50 cm (39 cm adjustment range). Helical gearing on the centre column acts as an automatic column brake. Mounting plate diameter is 89 mm. Without leg spread stops. The maximum height given below are that at an approx. 20° leg spread and with the centre column fully extended.

Light-metal mounting head with geared centre column and circular bubble. Centre column length is 50 cm (39 cm adjustment range). Helical gearing on the centre column acts as an automatic column brake. Mounting plate diameter is 89 mm. With leg spread stops at 20°, 35°, 55° and 80°. The maximum height given below are that at an 20° leg spread and with the centre column fully extended.

Nachrüstsatz (3 Stück) Stativbeinanschläge für Stative UNI Durch Montage dieser Stativbeinanschläge können die Stativbeine in den Winkeln 20°, 35°, 55° und 80° gespreizt werden. Zum Verstellen das Stativbein entlasten und Hebel auf gewünschte Position bewegen.

holder 75 cm for bicycle for tripods Report diameter 14 cm

holder 50 cm long for bicycle for tripods Report Diameter 14 cm

- High-precision tripod head for horizontal and vertical panning - vertical swivel is possible in a range from -40° to +90° - Camera support plate 110 x 80 mm - Camera mount thread 1/4", or 3/8" optional - Base thread: 3/8" - Diameter ground plate: 89 mm - Load capacity: 14 kg JETZT NEU: Durch Umstecken des Bedienarms ist die 90°-Neigung beidseitig möglich, so ist der Stativkopf auch für Großferngläser und Astronomen geeignet.

- High-precision tripod head for 3-dimensional pan/tilt operation - All-round swivel arm control possible from the front and rear as well as for right- and left-handed persons. - Each of plane of adjustment - horizontal, vertical, diagonal - can be released and locked individually. - Camera support plate 105 x 80 mm - Camera mount thread 1/4", or 3/8" optional - Base thread: 3/8" - Diameter ground plate: 89 mm - Load capacity: 12 kg

- High-precision tripod head for 3-dimensional pan/tilt operation - The same stable design as 3 D-Super, but without swivel arm - large camera support plate (100 mm in diameter) - Camera mount thread 1/4", or 3/8" optional - Base thread: 3/8" - Diameter ground plate: 89 mm - Load capacity: 12 kg

- Berlebach tripod cases give your tripod optimum protection and, at the same time, provide superb carrying convenience due to all-round carrying grips and an extra shoulder strap. Breathable cotton fabric guarantees temperature and moisture balance. - Inside diameter: 24 cm

Berlebach® tripod cases give your tripod optimum protection and, at the same time, provide superb carrying convenience du to all-round carrying grips and an extra shoulder strap. Breathable cotton fabric guarantees temperature and moisture balance.