Tripods

- Length in cm: 10/37 - Ø 25 mm

- Length in cm: 10/50 - Ø 25 mm

- Length in cm: 50 - Ø 25 mm - base plate Ø 68 mm

- Length: 50 cm

FOR TRIPODS REPORT The module insert 0 is the simplest and lowest-price tripod variant. It is equipped with a stationary fastening screw. In combination with Berlebach tripod heads, it is usable for a wide variety of applications. Perfect for work near the ground. The diameter of the supporting surface is 60 mm/2.4 in.

FOR TRIPODS REPORT The module insert 1 has got a spring supported fastening screw. It is suitable for the simple mounting of heavy heads or devices. The head is put on and is connected to the tripod by turning the screw. The diameter of the supporting surface is 60 mm/2.4 in.

FOR TRIPODS REPORT The module insert 2 is uquipped with a 50 cm long centre column with a diamter of 25 mm, made of precision wrough light-metal tubing, which allows a comfortable height adjustment. Each column is introduced accurately fitting in each tripod, in order to keep the tolerances as low as possible. the module insert 2 is also available with a firmly fixed rotating panorama plate, having the model designation 2/P. The support plate made of aluminium has got a diameter of 68 mm/2.7 in and is equipped with three safety screws, with which the mounted technology can be secured against unintentional release. The centre column can be used for work near the ground when it is turned over, or you use the centre column with a length of 10 cm.

FÜR STATIVE REPORT Der Moduleinsatz 2K ist mit einer 50 cm langen Kurbelmittelsäule (Durchmesser 25 mm) aus präzisionsgezogenem Leichtmetallrohr ausgestattet, so daß eine bequeme Höhenverstellung möglich ist. Der Auflageteller aus Aluminium hat einen Durchmesser von 68 mm und ist mit drei Sicherungsschrauben ausgestattet zur Sicherung der montierten Technik gegen unbeabsichtigtes Lösen. Befestigungsschraube: 3/8"

Für alle Stative REPORT im Modulsystem (Modell-Nr. mit 3 Ziffern) ? nicht kompatibel mit älteren Modellen (Modell-Nr. mit 4 Ziffern) Der Moduleinsatz 2 ist mit einer 50 cm langen Mittelsäule (Durchmesser 25 mm) aus präzisionsgezogenem Leichtmetallrohr ausgestattet, so daß eine bequeme Höhenverstellung möglich ist. Die Mittelsäule ist mit einem Panoramadrehteller versehen. Der Auflageteller aus Aluminium hat einen Durchmesser von 68 mm und ist mit drei Sicherungsschrauben ausgestattet zur Sicherung der montierten Technik gegen unbeabsichtigtes Lösen. Für bodennahes Arbeiten kann die Mittelsäule umgekehrt eingesetzt werden oder Sie verwenden eine geteilte oder die 10 cm kurze Mittelsäule.

FOR TRIPODS REPORT The module insert 3 has got a firmly installed levelling ball with diameter 55 mm/2.2 in and circular bubble. In this way, a quick and exact alignment of the tripod is possible. The swivel range is 30° in all directions. The supporting surface is 55 mm/2,2 in. The camera or tilt head fixation is effected by means of a spring supported tightening spindle. This module insert is particulary recommanded for heavy equipment, because one can also work with the integrated ball without an additional tilt head in some cases. The ocjective or the camera respectively is fixed directly onto the tripod. This is the most stable and most secure way to mount your camera, because there is only one junction between tripod and camera. The module insert 3 is also available with a firmly fixed rotating panorama plate, having the module designation 3/P.

Module insert with ball and Quick-Release-Choupling mod. 110

Module insert with ball and fixed Quick-Release-Coupling mod. 130 for all tripod REPORT