Stands

Stands / Column tripods

Column stands are particularly suitable for heavy loads. Column stands are also effective as a very stable alternative for smaller telescopes. Columns are a must in observatories and stationary installations.

View as Grid List
Sort by
Display

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

  • Steel pillar - weatherproof
  • Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
  • The stabilisers can be easily removed from the column for easier transport
    Height 1200 mm
  • Outer diameter 100 mm / wall thickness 5 mm
  • Suitable mounting adapters are optionally available (see accessories)
 
645.00 €
Estimated delivery time : 1-4 days
 
 

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

  • Steel pillar - weatherproof
  • Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
  • The stabilisers can be easily removed from the column for easier transport
    Height 500 mm
  • Outer diameter 100 mm / wall thickness 5 mm
  • Suitable mounting adapters are optionally available (see accessories)
 
525.00 €
Estimated delivery time : 1-4 days
 
 

The weatherproof pillar tripod is not only stable, but often also allows the telescope to be swivelled through where a tripod would already be at a standstill.

  • Steel pillar - weatherproof
  • Three outriggers with levelling screws - this allows you to set the device exactly level (levelling)
  • The stabilisers can be easily removed from the column for easier transport
    Height 700 mm
  • Outer diameter 100 mm / wall thickness 5 mm
  • Suitable mounting adapters are optionally available (see accessories)
 
570.00 €
Estimated delivery time : 1-4 days
 
 

Adapter for Celestron AVX Goto mounts to the TS Tri-Pier pier stand and also for DIY.

  • The adapter fits to the Celestron AVX mount.
  • Matching stainless steel counter screws and two pins for azimuth adjustment of the mount are included.
  • The adapter is optimized for the Celestron AVX mount.
  • Diameter at the bottom is 93.8 mm - fits the TS-Optics Tri-Pier pier tripod - also ideal for DIY with a pipe as pier.
169.00 €
Estimated delivery time : 2-3 days
 
 

Adapter for EQ6, EQ-5, H-EQ5, CGEM ... mounts to the TS Tri-Pier pier stand and also for DIY.

  • The adapter fits to Skywatcher mounts EQ3, EQ5, H-EQ5, EQ6, AZ-EQ6 and EQ6-R mounts.
  • The adapter fits Celestron CGEM mounts.
  • The adapter fits Bresser / Meade Exos-2 mounts and similar
  • Matching M10 and M12 stainless steel counter screws and two mandrels for azimuth adjustment of the mount are included.
  • Three different distances from the center to the azimuth adjustment are available
  • Diameter at the bottom is 93.8 mm - fits the TS-Optics Tri-Pier pier tripod - also ideal for DIY with a pipe as pier.
  • Diameter at the top is 115 mm
169.00 €
Estimated delivery time : 1-4 days
 
 

Adapter for Vixen mounts to the TS Tri-Pier pier stand and also for DIY.

  • The adapter fits many Vixen mounts with the GP type tripod connection.
  • Matching stainless steel counter screws and two pins for azimuth adjustment of the mount are included.
  • Two different distances from the center to the azimuth adjustment are available.
  • Diameter at the bottom is 93.8 mm - fits the TS-Optics Tri-Pier pier tripod - also ideal for DIY with a pipe as pier.
135.00 €
Estimated delivery time : 1-4 days
 
 

The adapter allows the connection of ball heads, tilt heads and AZ mounts with the 3/8" photo thread to the TS Tri-Pier pier stand and also for DIY.

  • The adapter has a 3/8" photo thread (male thread ) on the top side.
  • Diameter at the bottom is 93.8 mm - fits the TS-Optics Tri-Pier pier tripod - also ideal for DIY with a pipe as pier.
109.00 €
Estimated delivery time : 1-4 days
 
 

The tripod is designed for Skywatcher EQ6, H-EQ5 or EQ5, Celestron CGEM or iOptron mounts and can be loaded up to 100 kg.

  • Working height 950 mm
  • High quality 6061T aluminum and stainless steel
  • Weight only 8 kg
  • Flexible like a tripod, but stable like a pier
  • Ideal for astrophotography because telescopes do not hit the tripod legs, photography well past meridian is possible.
  • The legs can be folded for transportation
  • There is a leveling device with a counter screw on each leg
  • High-quality transport bag is included in scope of delivery
  • Adapters for mounts are optionally available
599.00 €
Estimated delivery time : 2-3 days
 
 
TTS-160 Panther Pier Adapter
215.00 €
Estimated delivery time : 1 week
 
 
TTS-160 Panther Pier Extension
215.00 €
Estimated delivery time : 1 week
 
 
TTS-160 Panther Mini Pier
389.00 €
Estimated delivery time : 1 week
 
 
TTS-160 Panther Folding Pier
1086.00 €
Estimated delivery time : 1 week