Rowan Engineering Ltd
Rowan Engineering Ltd
This solid mount carries up to 15 to 20 kg on each side and can be moved by simple push-to operation or with fine adjustment gears.
- Easy handling thanks to push-to operation and fine adjustment gears
- No need to loosen and clamp the drives thanks to friction clutches
- The flexible shafts for fine adjustment remain aligned with the observer at all times
- Rigid and smooth-running design with high-quality ball and tapered roller bearings
- With standard M12 threaded hole for mounting on tripods
- With Encoder and Nexus WiFi an Slow Motion Shafts
3264.00 €
Estimated delivery time : 1-4 weeks
This solid mount carries up to 15 to 20 kg on each side and can be moved by simple push-to operation or with fine adjustment gears.
- Easy handling thanks to push-to operation and fine adjustment gears
- No need to loosen and clamp the drives thanks to friction clutches
- The flexible shafts for fine adjustment remain aligned with the observer at all times
- Rigid and smooth-running design with high-quality ball and tapered roller bearings
- With standard M12 threaded hole for mounting on tripods
- With Encoder
2552.00 €
Estimated delivery time : 1-4 weeks
AZ 75 - the new double-sided deluxe mount with up to 15kg load capacity!
- Weight of the mount 4.1kg
- Weight of mount with 2 x V-mounting plates 4.4kg
- The mounting base can be supplied with M12, M10 or 3/8" threaded holes for mounting on tripods.
- AZ75 is compatible with AZ100 mounting plates.
1033.50 €
Estimated delivery time : 1-4 weeks
Rowan Mount AZ75 Alt-Az Mount with Renishaw Encoder and Nexus DSC Pro with WiFi. - the new double-sided deluxe mount with up to 15 kg load capacity!
- Easy handling due to push-to-operate
- Friction clutches mean no need to loosen or clamp the drives
- Rigid and smooth-running construction with high-quality ball and tapered roller bearings
- With standard M12/M10 or 3/8" threaded hole for mounting on tripods
- With Renishaw encoders on both axes. The cables move with the mount and do not get tangled or twisted as it moves.
- With Nexus DSC Pro Wifi digital pitch circles.
- The tray shown in the third picture is optional.
2408.00 €
Estimated delivery time : 1-4 weeks
Rowan Mount AZ75 Alt-Az Mount with Renishaw Encoder and Nexus II - the new double-sided deluxe mount with up to 15 kg load capacity!
- Easy handling due to push-to-operate
- Friction clutches mean no need to loosen or clamp the drives
- Rigid and smooth-running construction with high-quality ball and tapered roller bearings
- With standard M12/M10 or 3/8" threaded hole for mounting on tripods
- With Renishaw encoders on both axes. The cables move with the mount and do not get tangled or twisted as it moves.
- With Nexus II digital pitch circles.
2070.00 €
Estimated delivery time : 1-4 weeks
With this handle holder the AZ100mount can be easily turned in all directions.
189.00 € 144.00 €
Estimated delivery time : 1-2 days
With this handle holder the AZ75mount can be easily turned in all directions.
138.00 €
Estimated delivery time : 1-4 weeks
Product description Rowan is already known for its excellent azimuthal mounts. As an option, the mounts can be delivered with high quality encoders and the Nexus DSC. Now we can offer a complete GoTo system with motors for the AZ100 mount. The setup can communicate directly with Sky-Safari via WiFi. AZ100 Goto Motor Specifications WiFi connection to SkySafari and built-in motor configuration. Built-in mini planetarium for 1 or 2 star alignments. This upgrade requires AZ100 with encoders already installed. Please contact us if encoders still need to be installed on your mount. Power requirements. 12V DC @ 2.5 amps to 5.5mm DC jack with 2.5mm center pin. Operating Modes Quick start. Push-to and track. 1 or 2 star alignment. Full goto pan. Nexus DSC connection. No position loss due to shaft mounted encoders. Scope of delivery: AZ100 Goto Motor System. 2x motor assemblies. 2x 32-tooth pulleys and belts. 1x motor controller. 4x Encoder and motor cable.
Item condition: new, but not original packed
Item condition: new, but not original packed
1709.00 €
Estimated delivery time : 1-4 days
Rowan Mount AZ 100 with Renishaw Encoder CNC machined and black anodised finished and fitted with stainless steel hardware. Specifications includes an 80.0 mm diameter 7075 aluminium wheel gear and brass worm gear in adjustable worm block. 32mm diameter 7075 aluminium axis shafts supported in high quality ball and taper bearings. Features included adjustable friction clutches on both axis and 360 degree slow-motion controls allowing simultaneous push-to and slo-mo tracking. High quality flexible slow motion cables included. Both slow motion controls remain in alignment with the observer at all times. Load capacity is 15-20 kg each side depending on scope length. Scope of delivery: Mount Renishaw Encoder
Item condition: new, but not original packed
Item condition: new, but not original packed
2390.00 €
Estimated delivery time : 1-4 days
Connection adapter for the Rowan AZ100 mount and the EQ5 tripod. Also suitable for other platforms. This adaptor bolts diectly to the base of the AZ100. The AZ100 will then fit EQ5 or HEQ5 tripod heads using a M10 bolt. Ideal for travelling with small / lighter scopes that don't require a large tripod. Alternatively this adaptor allows fitting the AZ100 directly to a pier surface with out the need to access from below. The pier top will require 4 x M8 tapped holes on 90.0mm circle. CNC machined and black anodised finished and supplied with stainless steel hardware. Scope of delivery Tripod adapter Mounting screws
Item condition: new, but not original packed
Item condition: new, but not original packed
149.00 €
Estimated delivery time : 1-4 days
Rowan Saddle with Losmandy/Vixen DV profile
Item condition: new and original packed
Item condition: new and original packed
339.00 €
Estimated delivery time : 1-4 days
This solid mount carries up to 15 to 20 kg on each side and can be moved by simple push-to operation or with fine adjustment gears.
- Easy handling thanks to push-to operation and fine adjustment gears
- No need to loosen and clamp the drives thanks to friction clutches
- The flexible shafts for fine adjustment remain aligned with the observer at all times
- Rigid and smooth-running design with high-quality ball and tapered roller bearings
- With standard M12 threaded hole for mounting on tripods
1912.00 €
Estimated delivery time : 2-4 weeks
