Focuser & Accessories

This hand controller allows precise manual focus, vibration free!

• Focusing with a rotary knob, thus intuitive
• Two speeds, slow precision mode is active if the knob is pressed inside
  Speed indicators
• Standard network cable with RJ45 plugs for connection
• Can work simultaneously with the PC operation

This geared stepper motor has 0.0625° steps, 60 Ncm torque and little backlash, so you can focus your telescope fast and accurately with it - even with heavy imaging equipment.

• Useful resolution of 0.0625° (3.75 arc min) per step
• High torque for handling higher loads
• Low backlash making backlash compensation easier
• RJ45 socket allows using standard network cable for connecting to PegasusAstro´s Dual Motor Focus Controller
• Universal L Shaped Bracket allows mechanical connection to many focusers
• Supplied couplers allow mechanical connection to many focusing shafts

Focus fast, reliably and accurately your telescope using a stepper or DC motor and this controller.

• versatile, you can use your own motor instead of having to use one of PegasusAstro - and using another motor requires (perhaps) another cable, not another controller
• PC operation is standard, but manual operation does not even need a separate hand controller
• Temperature probe included
• Backlash compensation possible via firmware
• ASCOM and INDI compliant, but comes with a standalone program for Windows
• Firmware upgrade possible

Proudly standing between Pocket and Ultimate Powerbox, it has been designed to provide more advanced features than Pocket Powerbox in a more compact / quality design.

• 4 x 12 V DC power outlets for your equipment (a single channel to switch all four outputs ON/OFF via software)
• 12 amps of total distributed current
• Adjustable output (3, 5, 8, 9, 12 V) / 3 A (can be switched ON/OFF) - power your DSLR / mirrorless camera
• Embedded powered USB3 hub ? 4 x USB3 ports or 3 x USB2 ports available
• 1 x power USB port (up to 3 amps) ? suitable for powering Raspberry PI 3/4
• Port (RJ12) for external accessories (like external focus controller)
• 2 channels with PWM for dew heaters ? RCA outputs (tune levels via software)
• Humidity and temperature sensor (included)
• Auto tune dew heater channels
• Reverse polarity protection
• USB / PC controlled or standalone pperation out of the box
• Lightweight and extremely compact aluminium enclosure

This device is a practical power supply for the "grab and go" astrophotographer who does not want too much automation.

• 4 x 12 V DC power outlets for your equipment (ON/OFF via software)
• 10 amps of total power
• DSLR output (can be switched ON/OFF)
• 2 channels with PWM for dew heaters RCA outputs (tune levels via software)
• Humidity and temperature sensor (included)
• Auto tune dew heaters
• Reverse polarity protection
• USB / PC controlled or standalone operation out of the box
• Lightweight and extremely compact enclosure

With its coaxial power connector 5.5/2.1 mm, this power supply is suitable for Pocket Powerbox (PPB) and many other Pegasus products.

• Well matching the mentioned Pegasus Astro products
• Also available with other DC plugs
• Also available with other power cords
• Large range of input voltages
• Regulated with low ripple and noise
• Protected against damaging working states
• Sealed against dust and humidity