Focuser & Accessories
- Home /
- Mechanical Accessories /
- Focuser & Accessories
Focusers and Accessories
A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".
The completely new construction combines extreme durability and precision with high payload!
345.00 €
Estimated delivery time : 1-4 days
High-quality 2" clamping, suitable for focusers with S58 dovetail ring, like Baader Diamond Steeltrack
85.00 €
Estimated delivery time : 1-4 days
The flat adapter plate is used for mounting the 2" BDS-NT Diamond Steeltrack to a flat surface.
42.00 €
Estimated delivery time : 1-4 days
This adapter changes the eyepiece side connector of the Diamond Steeltrack focusers into a male M48 thread.
29.00 €
Estimated delivery time : 1-4 days
This adapter changes the eyepiece side connector of the Diamond Steeltrack focusers into a male M68 thread.
39.00 €
Estimated delivery time : 1-4 days
The metal magnet ring for the homing sensor of the Steeldrive II fits to Baader Diamond Steeltrack focusers.
73.00 €
Estimated delivery time : 1-4 days
The # 2957165 Steeldrive II is a high-precision motorised focuser drive for heavy loads - directly fitting to all Baader Steeltrack focusers.
665.00 €
Estimated delivery time : 2-3 days
This adapter changes the eyepiece side connector of the Diamond Steeltrack focusers into a male T2-thread.
27.00 €
Estimated delivery time : 1-4 days
Gear reduction 1:10 for 2.5" Messier Hexafoc focuser
99.00 €
Estimated delivery time : 1-4 days
Adapter set between Feathertouch 2 inch focusers and MotorFocusLA
90.00 €
Estimated delivery time : 3-4 days
Versatile base for flat surfaces, suitable for UNCN2, UNCN2-S, GSO focusers and older Baader Steeltrack focusers
- Flat support surface with only 5.2 mm overall height
- Four elongated holes for exact adjustment of the focusers
- Four counter screws to compensate a tilted position of the focuser
- Suitable for all focusers with a dovetail ring between 76-78 mm on the telescope side
- Secure fastening of the focusers with four M3 grub screws - not included in the scope of delivery
34.00 €
Estimated delivery time : 1 week
With this focuser you can easily replace your old model and upgrade to the new 2" R&P version with 8 bearings. The focuser can be loaded with up to 5 kg.
Key data:
Key data:
- 35mm focussing travel
- Load capacity up to 5 kg
- 1:10 reduction ratio
- Weight 700g
- Suitable for Skywatcher Newtonian telescopes
- Incl. Skywatcher adapter (round adapter/ notch adapter)
359.00 €
Estimated delivery time : 1 week
