Focuser & Accessories
- Home /
- Mechanical Accessories /
- Focuser & Accessories
Focusers and Accessories
A good focuser is just as important as the optics. Electronic focus control and precise mechanics are a must, especially for astrophotography. Here you will find a large selection of suitable "hardware".
The 1:10 dual speed gear allows for significantly better focusing.
99.95 €
Estimated delivery time : 1-4 days
![Picture of DUAL-SPEED 2" LOW PROFILE CRAYFORD FOCUSER FOR NEWTONIAN REFLECTORS](https://www.apm-telescopes.net/images/thumbs/0008767_2_crayford_fokussierer_fuer_newton_teleskop_20170_640.jpg "Show details for DUAL-SPEED 2" LOW PROFILE CRAYFORD FOCUSER FOR NEWTONIAN REFLECTORS")
DUAL-SPEED 2" LOW PROFILE CRAYFORD FOCUSER FOR NEWTONIAN REFLECTORS
239.00 €
215.00 €
Estimated delivery time : 1-4 days
DUAL-SPEED 2" CRAYFORD FOCUSER FOR SKY-WATCHER REFRACTORS
239.00 €
215.00 €
Estimated delivery time : 1-4 days
Recommended on GSO newtons to have the same focus point or on refracting
telescopes in combination with the 'L' version of the focuser
35.00 €
Estimated delivery time : 1 week
The attachment kit enables the ZW-Optical EAF motorised focusing system
to be connected and makes focusing child's play. The EAF system enables
focussing via the computer with temperature compensation.
79.90 €
67.92 €
Estimated delivery time : 3-4 days
Equip the popular Skywatcher Quattro Newton Linear Power focusers with the ZWO EAF motorised focus system.
- Suitable for Skywatcher Quattro Newt on Linear Power focusers
- Enables the use of the EAF motorised focus system from ZWO
- Manufactured using 3D printing
- Resistant to UV and temperatures up to approx. 80° C
- The Skywatcher Linear Power focuser is not included in the scope of delivery
49.90 €
42.42 €
Estimated delivery time : 3-4 days
Adapter for the M63 APM-Riccardi Reducer to Starlight 3" Focuser.
88.00 €
Estimated delivery time : 3-4 days
Thanks to this adapter kit, you can finally connect the renowned,
high-performance Tecnosky Precision focusers to Skywatcher Newtonian and
Dobsonian telescopes.
55.00 €
Estimated delivery time : 1 week
The highlights at a glance:
- Ball bearing 2" focuser: optimise your telescope with a more precise focuser for observation and photography
- Easy focusing: so you will be able to focus fast and not overshoot the target
- Adjustable: the friction can be adjusted
- 1kg load capacity. In addition, you can use the locking screw to fix the focus at any time if it should no longer deviate from the current setting.
- Focus on the point even at higher magnification
- 78mm diameter connector
- 59mm draw tube travel
- Height: 76mm to 2" adapter
- Incl. 2" to 1.25" adapter with filter thread (only 3mm optical travel)
- Weight 492g
79.00 €
Estimated delivery time : 3-4 days
Equip the 3" MONORAIL focuser from TS-Optics with the ZWO EAF motor focus system.
- Suitable for all 3" Monorail focusers and telescopes equipped with these focusers
- Suitable for all TS-Optics RC and Cassegrain telescopes with 10" aperture and larger
- Allows the use of the EAF motor focus system from ZWO
- Includes mounting adapter and four screws
- Easy and self-explanatory mounting, you will receive the mounting instructions after your purchase in an environmentally friendly PDF format
- Dimensionally stable up to 90 °C due to the use of PETG in 3D printing
119.00 €
101.15 €
Estimated delivery time : 3-4 days
Equip the 2" MONORAIL focuser from TS-Optics with the ZWO EAF motor focus system.
- Suitable for all 2" Monorail focusers and telescopes equipped with these focusers
- Allows the use of the EAF motorfocus system from ZWO
- Includes mounting adapter and four screws
- Simple and self-explanatory assembly, you will receive the assembly instructions after your purchase in an environmentally friendly PDF format
- Dimensionally stable up to 90 °C due to the use of PETG for 3D printing
119.00 €
101.15 €
Estimated delivery time : 3-4 days
Equip the 2" Crayford focuser from TS-Optics with the ZWO EAF motor focus system.
- Suitable for all 2" Crayford focusers and telescopes equipped with these focusers, e.g. TS-Photon Newtons
- Fits to the Crayford focusers with and without micro-reduction
- Allows the use of the EAF motor focus system from ZWO
- Elaborate and elegant adaptation to the focuser
- Includes mounting adapter and screw
- Simple and self-explanatory mounting incl. mounting instructions
- Dimensionally stable up to 110 °C due to the use of special PLA for 3D printing
99.00 €
84.15 €
Estimated delivery time : 3-4 days
