Autoguider Systems
- Home /
- CMOS & CCD Cameras /
- Autoguider Systems
Guiding Systems
Modern technology makes astrophotography with long exposure times easy. Guiding systems are used to keep the object exactly on the sensor. Either as a autoguider on a guide scope or using an off-axis guider in the primary light path. You can find both systems here.
Automatisches Alignment ohne Aufsuchen von Referenzsternen mit höchster Genauigkeit - nun auch für Skywatcher GoTo-Montierungen.
- Mit diesem StarSense Modul können Sie den Alignment-Prozess (Ausrichtung am Nachthimmel) Ihrer Skywatcher Montierung automatisieren.
- StarSense übernimmt das komplette Alignment Ihrer Skywatcher Montierung, Sie können nach wenigen Minuten mit dem Beobachten beginnen.
- StarSense ersetzt den orginalen Skywatcher Handkontroller - Sie können Ihre Skywatcher GoTo-Montierung mit der bewährten Celestron Ansteuerung ausstatten.
- Das Kit besteht aus drei Teilen: StarSense Kamera mit Sucherbasis, StarSense Interface-Box und Celestron GoTo-Handcontroller
MGEN autoguider for your mount - stand-alone or with computer - experience astrophotography in a new way
- Stand Alone or PC app controlled
- Selflearning (A.I.) adaptive guiding or manual modes
- Easy to use: one button push guiding or manual control
- Improved sensitivity with realtime darkframe correction
- Multistar guiding for extra high subpixel precision
- Polar alignment using digital Scheiner method
- DSLR and CCD exposure control
- Various dithering modes available
- Arbitrary binning modes for increasing sensitivity
- USB powered (5 V), typical 240 ma / 1.2 W
- AUX port for additional equipment
Very easy to operate via ASCOM drivers or standalone software, it will make your life easier by automatically adjusting your camera field with precision.
- 6 kg payload, but only 0.7 kg weight
- M54 connections avoid vignetting of large sensors
- Comes with adaptors for 2" receptacles and M48 camera rings
- Needs only 19 mm back focus
- Controlled via USB 2.0, no proprietary cable needed
- Uses ASCOM 6 for control, INDI support will follow
- Aluminum design increases rigidity
This device has 6 x USB 3.1 Ports. All ports are backwards compatible with USB 1.0 and USB 2.0 devices. Moreover, each port can deliver up to 2.5 A of current.
- Ports switchable (power and data), ASCOM supported
- Current of every port is monitored
- Hub supplied with 12 to 14 V
- Supports industrial grade temperature range from -40 °C to +85 °C
- Robust aluminum enclosure
