This adapter set is used to mount the Lacerta Motorfocus to the rack and pinion pull-out (RPA) TSRPA25, Photoline and similar pull-outs. Independent of OAZ manufacturer, colour, extension tube diameter, etc. - the focus wave housing is decisive (please compare exactly with the video, it must have the 3 adjacent grub screws!)

The Lacerta motofocus is usually mounted instead of the simple focus wheel, the microfocus side remains (Attention, do not use microfocus with the motor connected, the mechanics can suffer).
With some versions, however, the entire unit with microfocus has to be dismantled and inserted. Please try which case applies to you.
The focus wave housing of the pull-out must have an inner diameter of about 21mm for the focus button, and the focus wave itself must have an outer diameter of 6mm.

Scope of delivery:

• Coupling from 6mm focus shaft to Lacerta Motorfocus (silver coloured stainless steel adapter, pre-assembled)
• Special adapter for TSRPA25 etc., suitable for focus wave block with 21mm inner diameter (protrudes only 1mm)
• 2 grub screws for mounting on focus shaft housing and motor, as well as a service hole for the grub screws on the focus shaft itself

Video instructions for assembly:
TS RPA25 (newer version, with 3 adjacent grub screws on the microfocus side) and compatible slides: