Mechanical telescope accessories
- Home /
- Accessories /
- Mechanical telescope accessories
Mechanical telescope accessories
The flat adapter plate is used for mounting the 2" BDS-NT Diamond Steeltrack to a flat surface.
42.00 €
Estimated delivery time : 1-4 days
Baader Hyperion Mark IV Zoom Eyepiece (8-24mm) - 1.25" & 2"
275.00 €
Estimated delivery time : 2-3 days
Baader # 2954250 Hyperion / Morpheus M43 Extension for distance increase in astrophotography with Morpheus and Hyperion eyepieces
- Female thread M43x0.75 fits to the male thread on the eye side of the Morpheus and Hyperion eyepieces
- External thread M43x0.75 and APM Superzoom Okular
- Optical path 7.5 mm without external thread
20.00 €
Estimated delivery time : 1-4 days
This adapter changes the eyepiece side connector of the Diamond Steeltrack focusers into a male M48 thread.
29.00 €
Estimated delivery time : 1-4 days
This adapter changes the eyepiece side connector of the Diamond Steeltrack focusers into a male M68 thread.
39.00 €
Estimated delivery time : 1-4 days
The metal magnet ring for the homing sensor of the Steeldrive II fits to Baader Diamond Steeltrack focusers.
73.00 €
Estimated delivery time : 1-4 days
The # 2957165 Steeldrive II is a high-precision motorised focuser drive for heavy loads - directly fitting to all Baader Steeltrack focusers.
665.00 €
Estimated delivery time : 2-3 days
This adapter changes the eyepiece side connector of the Diamond Steeltrack focusers into a male T2-thread.
27.00 €
Estimated delivery time : 1-4 days
Gear reduction 1:10 for 2.5" Messier Hexafoc focuser
99.00 €
Estimated delivery time : 1-4 days
The laser-collimator makes aligning the mirrors of a Newtonian telescope simple, fast and precise.
74.90 €
Estimated delivery time : 3-4 days
This dovetail rail is suitable for mounting on BRESSER MESSIER 6 , 8 and 10 inch Dobson telescopes. The dovetail rail is manufactured according to the GP standard and therefore these Dobson telescope tubes can be used on any telescope mounting with the appropriate carrying capacity.
- dovetail rail (GP) for 6, 8 and 10 inch MESSIER Dobson telescopes
- when using these telescope tubes on EQ mounts
- the assembly is carried out on the original tube rings
- also suitable as spare part for MESSIER telescopes with 200mm prism rail
- assembly material and tools included
- length: 200mm; width: 45 mm; height: 16 mm
- bore spacing: 160 mm; Bore diameter: 6.5 mm
- dovetail rail (GP), mounting screws and hex wrench tool included
29.00 €
Estimated delivery time : 3-4 days
Set of 5 extension tubes with T2 thread on both sides for astrophotography. Additionally with adapter from SC to T2 thread.
29.00 €
Estimated delivery time : 3-4 days
