iOptron

This compact GoTo mount has an incredible 2.8 payload to mount weight ratio, despite being fully fledged.

• German GoTo mount
• 45 lbs (20 kg) payload, 15.8 lbs (7.2 kg) weight, portable!
• Sturdy stainless steel tripod, 1.75" leg diameter
• Stepper motor drive with micro steps and PPEC
• up to 4.5 °/sec slew speed
• up to 20° past meridian until stop
• 212000+ objects database
• ASCOM and autoguider ports
• comes with GPS module
• universal 12 V power rating
• Vixen/Losmandy style saddle plate
• electronic pole finder iPolar

This compact GoTo mount has an incredible 2.8 payload to mount weight ratio, despite being fully fledged.

• German GoTo mount
• 45 lbs (20 kg) payload, 15.8 lbs (7.2 kg) weight, portable!
• Sturdy stainless steel tripod, 1.75" leg diameter
• Stepper motor drive with micro steps and PPEC
• up to 4.5 °/sec slew speed
• up to 20° past meridian until stop
• 212000+ objects database
• ASCOM and autoguider ports
• comes with GPS module
• universal 12 V power rating
• Vixen/Losmandy style saddle plate
• Hard case in the scope of delivery

This compact GoTo mount has an incredible 2.8 payload to mount weight ratio, despite being fully fledged.

• German GoTo mount
• 45 lbs (20 kg) payload, 15.8 lbs (7.2 kg) weight, portable!
• Sturdy stainless steel tripod, 1.75" leg diameter
• Stepper motor drive with micro steps and PPEC
• Optical encoders allow Realtime PEC
• up to 4.5 °/sec slew speed
• up to 20° past meridian until stop
• 212000+ objects database
• ASCOM and autoguider ports
• comes with GPS module
• universal 12 V power rating
• Vixen/Losmandy style saddle plate
• electronic pole finder iPolar

This compact GoTo mount has an incredible 2.5 payload to mount weight ratio, despite being fully fledged.

• German GoTo mount
• 45 lbs (20 kg) payload, 18 lbs (8.2 kg) weight, portable!
• Sturdy LiteRoc stainless steel tripod, 1.75" leg diameter
• High-precision stepper motors for precise positioning and tracking
• Optical encoders allow Realtime PEC
• PEC < 0.25 arcseconds (rms) due to Realtime PEC
• Go2Nova 8407+ hand controller with built-in heater
• up to 4.5 °/sec slew speed
• up to 20° past meridian until stop
• 212000+ objects database
• ASCOM and autoguider ports
• comes with GPS module
• universal 12 V power rating
• Vixen/Losmandy style saddle plate
• electronic pole finder iPolar

New: ready to mate with Intel® NUC minicomputer at the front of the dovetail saddle seamlessly with the cable management system

This compact GoTo mount has an incredible 2.5 payload to mount weight ratio, despite being fully fledged.

• German GoTo mount
• 45 lbs (20 kg) payload, 18 lbs (8.2 kg) weight, portable!
• Sturdy LiteRoc stainless steel tripod, 1.75" leg diameter
• Stepper motor drive with micro steps and PPEC
• up to 4.5 °/sec slew speed
• up to 20° past meridian until stop
• 212000+ objects database
• ASCOM and autoguider ports
• comes with GPS module
• universal 12 V power rating
• Vixen/Losmandy style saddle plate
• electronic pole finder iPolar

The Go2Nova 8410 is the latest hand box for iOptron SkyHunter travel mounts.

• suitable for: iOptron SkyHunter mounts
• large 8-line LCD screen
• works even at low temperatures
• 9 different slewing speeds
• easy and precise alignment

This module equips your mount with a 32-channel receiving system for the Global Positioning System (GPS).

• adds GPS functionality to the CEM26/GEM28
• is also a replacement module for CEM40/GEM45
• 32-channel configuration for quick and precise locating
• comes with connection cable

This versatile mount combines low weight with high payload. Since no counterweights are required, it is particularly well suited for mobile use.

• Advanced harmonic drive technology
• Payload capacity of 13.5 kg with the mount weight of 3.7 kg
• CNC machined and cast metal body
• Unique friction brake to safely stop movement during a planned or unplanned power interruption
• 360 second gear period
• Go2Nova® hand controller with ~212,000 object database
• Cable management system, no hanging exterior cables to moving parts
• Dual saddle (Vixen and Losmandy-D style)
• Built in zero position search
• Power down position and location memory
• Integrated ST-4 autoguiding port
• Built-in Wi-Fi (via hand controller)
• USB port for firmware upgrade and computer control
• Carrying case

Tripod not included

This versatile mount combines low weight with high payload. Since no counterweights are required, it is particularly well suited for mobile use.

• Advanced harmonic drive technology
• Payload capacity of 13.5 kg with the mount weight of 3.7 kg
• CNC machined and cast metal body
• Unique friction brake to safely stop movement during a planned or unplanned power interruption
• 360 second gear period
• Permanent periodic error correction (PPEC)
• Go2Nova® hand controller with ~212,000 object database
• Cable management system, no hanging exterior cables to moving parts
• Dual saddle (vixen and losmandy-D styles)
• Built in zero position search
• Power down position and location memory
• Integrated ST-4 autoguiding port
• Built-in Wi-Fi (via hand controller)
• USB port for firmware upgrade and computer control
• Soft carrying case

This versatile mount combines low weight with high payload. Since no counterweights are required, it is particularly well suited for mobile use.

• Advanced harmonic drive technology
• Payload capacity of 13.5 kg with the mount weight of 3.7 kg
• CNC machined and cast metal body
• Unique friction brake to safely stop movement during a planned or unplanned power interruption
• 360 second gear period
• Permanent periodic error correction (PPEC)
• Go2Nova® hand controller with ~212,000 object database
• Cable management system, no hanging exterior cables to moving parts
• Dual saddle (vixen and losmandy-D styles)
• iPolar
  
• Built in zero position search
• Power down position and location memory
• Integrated ST-4 autoguiding port
• Built-in Wi-Fi (via hand controller)
• USB port for firmware upgrade and computer control
• Soft carrying case

This versatile mount combines low weight with high payload. Since no counterweights are required, it is particularly well suited for mobile use.

• Advanced harmonic drive technology
• Payload capacity of 13.5 kg with the mount weight of 3.7 kg
• CNC machined and cast metal body
• Unique friction brake to safely stop movement during a planned or unplanned power interruption
• 360 second gear period
• Permanent periodic error correction (PPEC)
• Go2Nova® hand controller with ~212,000 object database
• Cable management system, no hanging exterior cables to moving parts
• Dual saddle (vixen and losmandy-D styles)
• Built in zero position search
• Power down position and location memory
• Integrated ST-4 autoguiding port
• Built-in Wi-Fi (via hand controller)
• USB port for firmware upgrade and computer control
• iPolar electronic polarfinder
  
• Soft carrying case

• Aperture 30 mm
• Focal length 120 mm
• 1280x960 pixels
• 6.44 arc seconds / pixel
• ASCOM guiding (no ST-4 guiding)
• Only 200 g

The iOptron iPolar replaces the polar alignment scope and guarantees the most accurate alignment of your mount.

• This Polar Finder fits all iOptron CEM120 mounts
• The image is generated via a lens, the sky region is projected onto a sensitive CMOS sensor and evaluated via intelligent software.
• A large field of view of 13° guarantees that the celestial pole is already detected at the sensor, even if only coarsely polar aligned
• USB Plug and Play - no driver required
• Works in the northern and southern hemisphere.
• Perfect polar alignment for best possible tracking accuracy is achieved.
• The electronic polar finder comes without mount adaption

The adapter allows the iOptron # 3339 to be connected to CEM120 mounts.

• 3340A-120 connection adapter iOptron iPolar
• Suitable for CEM120 mounts
• Mount and electronic polar finder are not included in the scope of delivery

The Literoc tripod from iOptron offers good stability with 1.75 inch steel tripod legs, it is compatible with CEM26, GEM28, HEM27, HAE29 mount.

• 1.75" stainless steel legs
• Adjustable height from 30" to 46"
• Metal accessory tray

The # 8032 Mini Pier und tripod extension from iOptron is suitable for both equatorial and azimuth mounts and increases the distance mount to tripod by 20 centimeters.

• The Mini Pier raises the mounts position by 200 mm and prevents collisions of longer telescopes with a tripod.
• Suitable for: CEM70, CEM60, iEQ45 and iEQ45 Pro, AZ Mount Pro, MiniTower, MiniTower II, MiniTower Pro, ?
• also suitable for iEQ30/iEQ30 Pro (won´t fit on iEQ30 tripod, may limit low latitude application)
• The Mini Pier matches the Tri-Pier, iEQ45 and iEQ60 tripods and MiniTower tripods.
• The Mini Pier does NOT fit on the iEQ30 tripod

Perfect for adding distance between scope and tripod on iOptron CEM26/GEM28/HEM27/HAE29

• Fits between scope and iOptron tripod for CEM26/GEM28/HEM27/HAE29 mount.
• Increases height by 8 inches (200 mm)

Mounting block for cameras suitable to iOptron SkyTracker Pro

• Attachment to Skytracker with two knurled screws
• Camera connection 1/4"
• Replacement part or for quick exchange of two cameras

Use iOptron´s MiniPier Top Plate to attach CEM70, CEM60 or CEM60-EC mounts to an existing or planned pier or tripod.

• has threaded holes for many mounts from iOptron
• comes with mounting material for CEM70, CEM60 or CEM60-EC
• can be used for own piers or tripods

The iOptron SkyGuider PRO allows you to take long exposures with your DSLR or CCD camera to capture stunning images of the night sky. Aligning to the celestial pole is especially easy thanks to the iPolar system.

• All metal mechanical structure
• Attaches to a camera tripod with 3/8? or 1/4? threads
• Payload 11 lbs (5 kg) (balanced, with DEC mounting bracket, exclude CW)
• Detachable alt-az base with fine latitude and azimuth adjusters for easy polar alignment
• The iPolar electronic polar finder for precise polar alignment is in included in the scope of delivery.
• 4 tracking speeds (1X, 1/2X, solar and lunar)
• Built-in rechargeable battery for up to 20 hours of operation
• Built-in ST-4 autoguiding port
• Built-in shutter triggering port
• Vixen dovetail saddle

The SkyHunter is a perfect travel mount with GoTo for observing.

• Carrying capacity up to 5 kg instrument weight
• Ideal for compact telescopes, such as William RedCat or TS Apos up to 70 mm aperture
• Built-in battery for field use with power supply for charging
• GoTo mount - control via smartphone or tablet or optional # 8410 handbox
• Servo motors with optical encoders in both axes for accurate tracking and precise positioning
• Includes counterweight rod (20 mm diameter) and 1.35 kg counterweight for heavier instruments
• Including stainless steel tripod and pier extension - adaptation via 3/8" photo tripod thread
• Vixen / EQ5 style quick coupling

• Carrying capacity up to 5 kg instrument weight
• Ideal for telephoto lenses and compact telescopes, such as William RedCat or TS Apos up to 70 mm aperture
• Built-in battery for field use with power supply for charging
• GoTo mount - control via smartphone or tablet or optional # 8410 handbox
• Servo motors with optical encoders in both axes for accurate tracking and precise positioning
• Autoguiding interface available (iGuider, no ST-4)
• Includes counterweight rod (20 mm diameter) and 1.35 kg counterweight for heavier instruments
• Including stainless steel tripod and pier extension - adaptation via 3/8" photo tripod thread
• Vixen / EQ5 style quick coupling

The iOptron SkyTracker Pro makes astrophotography easy and allows taking impressive images of the night sky. Aligning to the celestial pole is especially easy thanks to the iPolar system.

• Configure the SkyTracking according to your needs. Order suitable accessories via the options list -see below.
• The SkyTracker Pro can be loaded with equipment up to 3 kg with optional counterweight
• A polar wedge with fine adjustment and the electronic polar scope iPolar for precise polar alignment are already included in the scope of delivery
• The SkyTracker has an internal rechargable battery (up to 24 hours operation). You don´t have to worry about the power supply.
• The SkyTracker fits directly to photo tripods and astronomical tripods. Tripod recommendations can be found in the accessories section.
• The camera is connected by using a ball head, we recommend the TS-BH-51AT (see accessories section)
• The camera is connected via a ball head - see options
• Particularly easy operation guarantees a lot of fun with astrophotography from the outset, at a setup-time of only a few minutes
• Sidereal tracking, 1/2 speed for foreground highlights, solar and lunar speed for northern and southern hemisphere
• Practical carrying bag for storing and transport is included