CMOS & CCD Cameras

  • Home /
  • CMOS & CCD Cameras

CCD / CMOS Astrofoto Photography

For the successful hunt for celestial objects you will find the electronic aids here: sensors, OAG, accessories and important filters. A wide selection is available.

View as Grid List
Sort by
Display
Gsense400 back illuminated TVISB grade 1 45mm shutter
21063.00 €
Estimated delivery time : 1-2 months
 
 
Gsense 400 back illuminated TVISB grade 2 with 45mm Shutter.
19516.00 €
Estimated delivery time : Unbekannte Lieferzeit
 
 
Gsense 400 back illuminated TVISB grade 1.
19338.00 €
Estimated delivery time : Unbekannte Lieferzeit
 
 

Cooled USB 3.0 medium format monochrome camera with powerful 44x33 mm sensor for ultimate class astrophotography

  • Powerful, regulated Peltier cooling up to 35 °C below ambient temperature
  • Medium format sensor Sony IMX461 (44x33 mm) with 100 megapixels
  • High resolution due to 3.76 µm pixels
  • Peak quantum efficiency 91%!
  • 16 bit ADC - dynamic range like a CCD sensor for more gradations
  • No more disturbing amplifier glow (amp glow)
  • Anti-Dew heating already built in
  • Working distance only 22.5 mm from M68 female thread
  • With only 910 grams a lightweight for its size - does not stress the focuser much
  • USB 3.0 for fast data transfer
  • DDR3 buffer for stable data transfer
17999.00 €
Estimated delivery time : 1-4 weeks
 
 
Gsense 400 back illuminated TVISB illuminated grade 2.
17790.00 €
Estimated delivery time : Unbekannte Lieferzeit
 
 
Gsense 400 front illuminated TVISB grade 1 with 45mm Shutter.
17487.00 €
Estimated delivery time : Unbekannte Lieferzeit
 
 
Gsense 400 front illuminated grade 2 with 45mm Shutter.
16541.00 €
Estimated delivery time : 1-2 months
 
 
Gsense400 front illuminated grade 1 (non-microlensed)
15761.00 €
Estimated delivery time : 1-2 months
 
 
Gsense400 front illuminated grade 2 (non-microlensed)
14815.00 €
Estimated delivery time : 1-2 months
 
 
The Hypercam AA61CFX is the ultimate choice for the serious astro imaging enthusiast who wants a full frame camera which will outperform ...
5049.00 €
Estimated delivery time : 2-4 weeks
 
 
The Hypercam AA61MFX is the ultimate choice for the serious astro imaging enthusiast who wants a full frame camera which will outperform ...
5049.00 €
Estimated delivery time : 2-4 weeks
 
 
Cooled USB 3.0 full-frame size color astro camera with powerful 24x36 mm sensor for top class astrophotography
4990.00 €
Estimated delivery time : 1-4 days
 
 
Cooled USB 3.0 full-frame size monochrome astro camera with powerful 24x36 mm sensor for top class astrophotography
4990.00 €
Estimated delivery time : 1-4 days
 
 
ALccd11 Monochrome Astronomy CCD Camera with full Format Kodak KAI11002 Sensor.
4595.00 €
Estimated delivery time : 1-4 days
 
 
Cooled USB 3.0 full-frame size color astro camera with powerful, back-illuminated 36 x 24 mm CMOS sensor with 14 bit for astrophotography
4199.00 €
Estimated delivery time : 1-4 days
 
 

Touptek CMOS camera SkyEye62AC/AM
Powerful CMOS camera for DeepSky photography

  • Sony CMOS IMX455 chip
  • Full frame format
  • 60 mill. pixels
  • 16 bit ADC
  • 512 MB DDR3 RAM
  • USB3/USB2
  • Cooling -35°
  • 6.3 frames/sec doenload/image at full resolution
  • QE >80%
  • Available as monochrome or colour version
4190.00 €
Estimated delivery time : 1-4 days
 
 
ATIK ONE 6.0 CCD Camera with internal filter wheel - COMBO package..
3550.00 €
Estimated delivery time : 1-4 days
 
 
Cooled USB 3.0 APS-C format monochrome astro camera with powerful 23.5 x 15.7 mm back-illuminated CMOS sensor with 16 bit for astrophotography
3150.00 €
Estimated delivery time : 1-4 days
 
 
Cooled USB 3.0 full frame astro camera with high sensitivity and zero-amp glow for deep sky astrophotography
  • Full-frame color sensor Sony IMX410 - back-illuminated
  • 24 x 36 mm - diagonal 43.3 mm
  • 24 MP - 6064 x 4040 pixels
  • Pixel size 5.94 µm - can be used on almost all telescopes
  • 14 bit ADC - dynamic range like a CCD sensor
  • No amplifier glow due to Zero Ampglow circuitry
  • Built-in UV/IR blocking filter as protection glass
  • Heater installed to prevent condensation - Sensor chamber is sealed airtight
  • 512 MB DDR3 buffer for stable data transmission
  • M54x0.75 connection thread (female)
  • Back focus 17.5 mm (distance sensor to thread)
  • Binning is supported
  • Manufacturer of the camera is Touptek
2990.00 €
Estimated delivery time : 3-4 weeks
 
 
A 14bit Colour Full Frame astro imaging camera with latest Sony 24 mega-pixel IMX410 BSI sensor.
2949.00 €
Estimated delivery time : 2-4 weeks
 
 
ALccd12 Color Astronomy CCD Camera with Sony Super HAD Sensor.
2895.00 €
Estimated delivery time : 1-4 days
 
 

Cooled USB 3.0 astro camera with Sony IMX571 color sensor AND guiding sensor in one housing

  • Imaging and guiding with only one telescope - without off-axis guider - due to the integrated guiding sensor
  • Highly sensitive guiding sensor
  • Powerful Peltier cooling
  • Sony IMX571 APS-C format color sensor - back-illuminated
  • High resolution due to 3.76 µm pixels
  • 16 bit ADC - dynamic range like a CCD sensor
  • Anti-dew heater already installed
  • No amplifier glow
  • Telescope side connection: M54x0.75 female thread
  • Working distance only 17.5 mm from the internal thread
  • Telescope and mount in the third picture are for illustration only and not included.
2716.00 €
Estimated delivery time : 1-4 days
 
 
The Altair Hypercam from QHY offers the highest standard for astrophotography with the new 16bit Sony IMX571 sensor in APS-C format
2419.00 €
Estimated delivery time : 2-4 weeks
 
 
High resolution deep sky camera with large SONY Exmor IMX432 CMOS sensor and active cooling for telescopes with short and moderate focal lengths.
2390.00 €
Estimated delivery time : 3-4 days
 
 
ATIK Color CCD Camera 414EX - small 60mm diameter housing Sony ICX825 Sensor with Anti Blooming
2201.00 €
Estimated delivery time : 1-4 days
 
 
The Hypercam 115M has a 11.6mp Sony IMX492 4/3rds sensor (23.2mm diagonal) capable of 14bit depth...
2049.00 €
Estimated delivery time : 2-4 weeks
 
 
ALccd9 Monochrome Astronomy CCD Camera with Kodak KAF8300 Sensor.
1995.00 €
Estimated delivery time : 1-4 days
 
 

Cooled USB3.0 COLOR PRO astro camera for deep-sky photography. High-resolution SONY CMOS sensor with 16 megapixels.

  • Powerful Peltier cooling up to 40 °C below ambient
  • Sensor: SONY IMX071 CMOS sensor with 28.4 mm diagonal (APS-C format)
  • Pixels: 4.78 µm pixel size - 4944 x 3284 pixels
  • Short download time - USB 3.0 (can also be used with USB 2.0
  • 2x USB 2.0 outputs (connectors identical to ASI1600 cooled cameras)
  • Rolling shutter
  • Protective AR window built-in - full transmission even in infrared
  • Telescope connection: T2 - M42x0.75 female thread and 2" throug the both extension rings
    Separately screwed front panel - now the camera body cannot be unscrewed by mistake
  • DDR memory buffer 256 MB for more stable data exchange - minimizes amp glow even with USB2.0 characteristic feature of the new PRO versions)
  • No problems with dew or icing through integrated heating
1799.00 €
Estimated delivery time : 1-4 weeks
 
 
ALccd9C Color Astronomy CCD Camera with Kodak KAF8300 Sensor.
1795.00 €
Estimated delivery time : 1-4 days
 
 
ALccd10 Color Astronomy CCD Camera with Sony ICX493AQA Sensor.
1795.00 €
Estimated delivery time : 1-4 days
 
 
Integra 85 – Camera Field Rotator 
1780.00 €
Estimated delivery time : 1-2 days
 
 
The C0 and C1 series cameras with global shutter CMOS sensors were designed to be small, lightweight imagers for Moon and planets and for automatic telescope guiding.
1759.00 €
Estimated delivery time : 1-2 weeks
 
 
The new standard in astro imaging, Altair Hypercam 26C uses the latest 16bit Sony IMX571 sensor with ultra low read noise and super high quantum efficiency in a large APS-C format.
1814.00 € 1633.00 €
Estimated delivery time : 2-4 weeks
 
 

ATR432C features a resolution of 1600x1100 pixels, 9 ?m pixels and a 1.1-inch optical format.It offers support for high frame rate mode(109FPS at all Pixel Readout 12 bit),and has a readout noise level as low as 2.4e. Additionally ,the camera have an excellent TEC cooling system maintains precise temperature control within a deviation of 0.1?, while the dew prevention heater (window heating) further enhances performance.

1629.00 €
Estimated delivery time : 2-4 weeks
 
 

ATR432C features a resolution of 1600x1100 pixels, 9 ?m pixels and a 1.1-inch optical format.It offers support for high frame rate mode(109FPS at all Pixel Readout 12 bit),and has a readout noise level as low as 2.4e. Additionally ,the camera have an excellent TEC cooling system maintains precise temperature control within a deviation of 0.1?, while the dew prevention heater (window heating) further enhances performance.

1629.00 €
Estimated delivery time : 2-4 weeks
 
 
The TEC-cooled Hypercam 294C Colour camera has a Thermoelectric cooling system for extremely low noise imaging.
 
1499.00 €
Estimated delivery time : 2-4 weeks
 
 
Altair Hypercam 183M PRO TEC Monochrome 20mp Astronomy Imaging Camera w 4GB DDR3 RAM
1490.00 €
Estimated delivery time : 1-4 weeks
 
 
High resolution deep sky camera with large SONY Exmor IMX432 CMOS sensor and active cooling for long focal length telescopes.
1490.00 €
Estimated delivery time : 3-4 days
 
 
The Hypercam 269C Colour camera has a Thermoelectric Cooling System (TEC) for extremely low noise imaging. 
1469.00 €
Estimated delivery time : 2-4 weeks
 
 
ALccd8L Astronomy CCD Camera with Sony ICX413AQ Sensor.
1395.00 €
Estimated delivery time : 1-4 days
 
 
One of the most sensitive cooled astro cameras in the market with 84% QE and almost 20 million pixels from for all fields of astrophotography.
1390.00 €
Estimated delivery time : 1-4 days
 
 
ATIK Infinity B/W CCD Camera:The Infinity is the first CCD camera from Atik with a revolutionary technology
1355.00 €
Estimated delivery time : 1-4 days
 
 
Hypercam AA533MTEC headlines:
  • 9-megapixel Sony IMX533 back-illuminated sensor with 16mm diagonal
  • 14bit ADC delivers 16,384 grey levels in the image
  • Zero Amp Glow even at 10 minutes exposure
  • Special Ultra Low Read Noise mode
  • True hardware binning
  • 2 stage TEC cooling
  • Heated optical window
  • 2 year warranty, with no sensor freeze guarantee**.
  • USB3.0/USB2.0 connection with rear USB2.0 hub (2x ports)
  • 12V power is required to operate this camera.
  • Armoured case included
  • Supplied basic 240~110v compatible 12v DC power supply with choice of UK, USA or EU plug
  • Software & drivers downloadable from www.altairastro.help 
1349.00 €
Estimated delivery time : 3-4 weeks
 
 
The fan-cooled Hypercam 294C Colour camera is the preferred alternative to a DSLR camera when it comes to astro-imaging, due to it's higher sensitivity to Hydrogen Alpha light.
1199.00 €
Estimated delivery time : 2-4 weeks
 
 
LED technology for a colour-neutal, pure white image, absolutely flicker-free
1190.00 €
Estimated delivery time : 2-3 days
 
 
The C0 and C1 series cameras with global shutter CMOS sensors were designed to be small, lightweight imagers for Moon and planets and for automatic telescope guiding.
1189.00 €
Estimated delivery time : 1-2 weeks
 
 
One of the most sensitive cooled astro cameras in the market with 84% QE and almost 20 million pixels from for all fields of astrophotography.
1155.00 €
Estimated delivery time : 1-4 days
 
 
Altair Hypercam 183C PRO TEC COOLED 20mp Colour Astronomy Imaging Camera w 4GB DDR3 RAM
1134.00 €
Estimated delivery time : 1-4 weeks
 
 
High resolution deep sky camera with large Panasonic CMOS sensor and active cooling. 
1099.00 €
Estimated delivery time : 3-4 days
 
 
ToupTek USB 3.0 monochrome astro camera with powerful Sony CMOS sensor for astrophotography - with very small pixels for high resolution
  • Powerful two-stage Peltier cooling up to 35 °C below ambient temperature
  • 1" sensor SONY Exmor CMOS IMX183, monochrome, back-illuminated
  • 13.06 x 8.76 mm size, diagonal 15.9 mm
  • 5440 x 3648 pixels - 20 MP
  • Extremely high resolution due to 2.4 µm pixel size
  • Connection on telescope side: M42x0.75 female thread, 2" barrel
  • Working distance only 17.5 mm from the barrel
  • Built-in protection windows
  • Binning is supported
1069.00 €
Estimated delivery time : 1-4 days
 
 
Slim new high resolution monochrome ATIK camera, especially for Hyperstar and Fastar systems.
999.00 €
Estimated delivery time : 1-4 days
 
 
The Oculus all-sky camera is designed to provide high quality sky images for weather and meteor observations. The camera core is based on the 1.4 megapixel ‘SuperStar’ and it employs a 2.5mm FL f1.2 ‘Fish-Eye’ lens or 1.55m f/2 to achieve 150 degrees or 180 degrees coverage.
990.00 €
Estimated delivery time : 1-2 weeks
 
 
Altair AA533CTEC has a 14bit Sony IMX533 Back Side Illuminated Sensor with very high sensitivity.
989.00 €
Estimated delivery time : 2-4 weeks
 
 
The Altair Hypercam IMX183M PRO is a 20mp astronomy camera, featuring amp glow reduction, and low read noise, producing extremely smooth, detailed images.
960.00 €
Estimated delivery time : 1-4 weeks
 
 
The C0 and C1 series cameras with global shutter CMOS sensors were designed to be small, lightweight imagers for Moon and planets and for automatic telescope guiding.
955.00 €
Estimated delivery time : 1-2 weeks
 
 
LED technology for a colour-neutal, pure white image, absolutely flicker-free
952.00 €
Estimated delivery time : 1-4 days
 
 
The C0 and C1 series cameras with global shutter CMOS sensors were designed to be small, lightweight imagers for Moon and planets and for automatic telescope guiding.
939.00 €
Estimated delivery time : 1-2 weeks
 
 
The Hypercam 269C Colour camera has a Fan Cooling System to reduce heat build-up during long exposures.
939.00 €
Estimated delivery time : 2-4 weeks
 
 

MGEN autoguider for your mount - stand-alone or with computer - experience astrophotography in a new way

  • Stand Alone or PC app controlled
  • Selflearning (A.I.) adaptive guiding or manual modes
  • Easy to use: one button push guiding or manual control
  • Improved sensitivity with realtime darkframe correction
  • Multistar guiding for extra high subpixel precision
  • Polar alignment using digital Scheiner method
  • DSLR and CCD exposure control
  • Various dithering modes available
  • Arbitrary binning modes for increasing sensitivity
  • USB powered (5 V), typical 240 ma / 1.2 W
  • AUX port for additional equipment
933.00 €
Estimated delivery time : 1-4 days
 
 
The Altair Hypercam IMX174 camera has the sought-after Sony Pregius Global Shutter IMX174 CMOS sensor, with extremely low read noise and 2.3mp resolution.
909.00 €
Estimated delivery time : 2-4 weeks
 
 

A powerful monochrome camera with Peltier cooling for a very reasonable price - the CMOS camera can be used in any field of astrophotography.

  • Sensor: 1/1.2" CMOS IMX585 with 8.29 megapixel resolution
  • Sensor size: 6.26 mm x 11.13 mm - Diagonal: 12.84 mm
  • Very high resolution: 3840 x 2160 pixels with 2.9 µm size
  • Approx. 91 % QE - high sensitivity for short exposure times
  • Powerful pelier cooling up to 35 °C below ambient temperature
  • High frame rate of 47 fps also suitable for EAA
  • Full well capacity 40 ke-
  • Starvis 2 technology with back illumination
  • USB 3.0 for fast image download
  • DDR Memory Buffer 512MB
  • 12 bit ADC
  • No amplifier glow (amp glow)
  • Extensive scope of delivery
899.00 €
Estimated delivery time : 1-4 days
 
 
ToupTek USB 3.0 color astro camera with powerful Sony CMOS sensor for astrophotography - with very small pixels for high resolution
  • Powerful two-stage Peltier cooling up to 35 °C below ambient temperature
  • 1" sensor SONY Exmor CMOS IMX183, color back-illuminated
  • 13.06 x 8.76 mm size, diagonal 15.9 mm
  • 5440 x 3648 pixels - 20 MP
  • Extremely high resolution due to 2.4 µm pixel size
  • Connection on telescope side: M42x0.75 female thread, 2" barrel
  • Working distance only 17.5 mm from the barrel
  • Built-in protection windows
  • Binning is supported
879.00 €
Estimated delivery time : 1-4 days
 
 
Wanderer Field Rotator Lite
849.00 €
Estimated delivery time : 1 week
 
 

Feature summary Altair Hypercam 585M CMOS Camera:

  • TEC cooling with heatsink for extra low noise
  • On board temperature sensor for perfect dark frame calibration.
  • 5A 12v DC Power supply included, with 110-240v input.
  • IMX585 Mono 8.3mp Starvis 2 Back Illuminated CMOS Sensor
  • On-chip HGC, LCG and HDR Support
  • 3840 x 2160 pixel resolution
  • 2.9 um Square Pixels
  • 1/1.2-inch Optical Format
  • Sensor size: 11.14 x 6.26 mm (12.85mm Diagonal)
  • 12-bit ADC (with 16bit output in HDR mode)
  • 512Mbyte DDR3 Memory buffer
  • Low Noise: 0.65 to 0.5e- in HCG mode
  • Fast Frame Rate 47 FPS in 8bit mode
  • Binning from 1x1 to 8x8 in either stacking or averaging modes.
839.00 €
Estimated delivery time : 3-4 weeks
 
 

Feature summary Altair Hypercam 585C CMOS Camera:

  • TEC cooling with heatsink for extra low noise
  • On board temperature sensor for perfect dark frame calibration.
  • 5A 12v DC Power supply included, with 110-240v input.
  • IMX585 Colour 8.3mp Starvis 2 Back Illuminated CMOS Sensor
  • On-chip HGC, LCG and HDR Support
  • 3840 x 2160 pixel resolution
  • 2.9 um Square Pixels
  • 1/1.2-inch Optical Format
  • Sensor size: 11.14 x 6.26 mm (12.85mm Diagonal)
  • 12-bit ADC (with 16bit output in HDR mode)
  • 512Mbyte DDR3 Memory buffer
  • Low Noise: 0.65 to 0.5e- in HCG mode
  • Fast Frame Rate 47 FPS in 8bit mode
  • Binning from 1x1 to 8x8 in either stacking or averaging modes.

799.00 €
Estimated delivery time : 3-4 weeks
 
 

This camera is excellent for sun and moon with its large sensor, but can also be used very well for deep sky because of the low noise.

  • Sensor: 1.1" CMOS IMX432 with 1.77 megapixels resolution
  • Sensor size: 9.9 mm x 14.5 mm - diagonal: 17.6 mm
  • Large image field - very well suited for sun and moon
  • Pixels with 9.0 µm size and corresponding light sensitivity
  • With approx. 79 % QE a still high efficiency for short exposure times
  • Very well suited for EAA due to high frame rate of 120 fps
  • Full well capacity 97 ke-
  • Starvis technology with back illumination
  • USB 3.0 for fast download of images
  • 12 bit ADC
  • No amplifier glow (amp glow)
  • Passive cooling with heat dissipation against heating of the sensor during long time exposures
  • Good suitability for deep sky imaging
  • AR protection filter built in with full transmission also in infrared
  • ST4 level autoguiding interface included
 
793.00 €
Estimated delivery time : 1-4 weeks
 
 
The QHY5-III series camera is a USB3.0 super-speed camera with a Guide Port. It still uses the same standard 1.25-inch eyepiece adapter and has an adjustable location ring for confocality with an eyepiece. The QHY5-III comes in a very small but powerful package!
768.00 €
Estimated delivery time : 3-4 days
 
 

Automatisches Alignment ohne Aufsuchen von Referenzsternen mit höchster Genauigkeit - nun auch für Skywatcher GoTo-Montierungen.

  •  Mit diesem StarSense Modul können Sie den Alignment-Prozess (Ausrichtung am Nachthimmel) Ihrer Skywatcher Montierung automatisieren.
  •  StarSense übernimmt das komplette Alignment Ihrer Skywatcher Montierung, Sie können nach wenigen Minuten mit dem Beobachten beginnen.
  •  StarSense ersetzt den orginalen Skywatcher Handkontroller - Sie können Ihre Skywatcher GoTo-Montierung mit der bewährten Celestron Ansteuerung ausstatten.
  •  Das Kit besteht aus drei Teilen: StarSense Kamera mit Sucherbasis, StarSense Interface-Box und Celestron GoTo-Handcontroller
759.00 €
Estimated delivery time : 3-4 days
 
 
The Altair Hypercam IMX183C PRO is a 20mp astronomy camera, featuring amp glow reduction, and low read noise, producing extremely smooth, detailed images.
759.00 €
Estimated delivery time : 1-4 weeks
 
 
The QHY5-III series camera is a USB3.0 super-speed camera with a Guide Port. It still uses the same standard 1.25-inch eyepiece adapter and has an adjustable location ring for confocality with an eyepiece. The QHY5-III comes in a very small but powerful package!
748.00 €
Estimated delivery time : 2-4 weeks
 
 

PegasusAstro Falcon V2 Camera Field Rotator

The image field rotator is very easy to operate via ASCOM drivers or stand-alone software and makes astrophotography easier for you by automatically and precisely setting the desired camera orientation.

  • 6 kg payload, but only 0.7 kg weight
  • M68 connections avoid vignetting of large sensors
  • Numerous adapters available for common threads
  • Requires only 15.5 mm back focus
  • Support for Alt-AZ field derotation
  • USB-C connection: single cable for power and data.
  • Wi-Fi enabled: Hotspot and 2.4 GHz wireless client support.
  • Utilizes ASCOM and Indi
  • Sturdy aluminum body
729.00 €
Estimated delivery time : 1-4 weeks
 
 

A powerful color camera with Peltier cooling for a very competitive price - the CMOS camera can be used in any field of astrophotography.

  • Sensor: 1/1.2" CMOS IMX585 with 8.29 megapixel resolution
  • Sensor size: 6.26 mm x 11.13 mm - Diagonal: 12.84 mm
  • Very high resolution: 3840 x 2160 pixels with 2.9 µm size
  • Approx. 91 % QE - high sensitivity for short exposure times
  • Powerful pelier cooling up to 35 °C below ambient temperature
  • High frame rate of 47 fps also suitable for EAA
  • Full well capacity 40 ke-
  • Starvis 2 technology with back illumination
  • USB 3.0 for fast image download
  • DDR Memory Buffer 512MB
  • 12 bit ADC
  • No amplifier glow (amp glow)
  • Extensive scope of delivery
699.00 €
Estimated delivery time : 1-4 days
 
 
The C0 and C1 series cameras with global shutter CMOS sensors were designed to be small, lightweight imagers for Moon and planets and for automatic telescope guiding.
695.00 €
Estimated delivery time : 1-2 weeks
 
 
The C0 and C1 series cameras with global shutter CMOS sensors were designed to be small, lightweight imagers for Moon and planets and for automatic telescope guiding.
679.00 €
Estimated delivery time : 1-2 weeks
 
 

High-performance monochrome astro camera - large 2.3 megapixel sensor for solar, lunar and planetary photography and for deep-sky imaging

  • 1/1.2" sensor IMX174LLJ CMOS
  • Resolution 2.3 MP - 1936 x 1216 PX
  • Pixel size 5.86 µm
  • Sensor size: 11.34 mm x 7.13 mm
  • Extremely high frame rate of 164 fps, global shutter
  • Minimal download time through USB 3.0
  • Very compact - only 62 mm x 41 mm
  • Autoguiding port (ST-4)
  • AR protect window built-in - full transmission also in IR
 
676.00 €
Estimated delivery time : 1-4 days
 
 
The C0 and C1 series cameras with global shutter CMOS sensors were designed to be small, lightweight imagers for Moon and planets and for automatic telescope guiding.
669.00 €
Estimated delivery time : 1-2 weeks
 
 
The C0 and C1 series cameras with global shutter CMOS sensors were designed to be small, lightweight imagers for Moon and planets and for automatic telescope guiding.
659.00 €
Estimated delivery time : 1-2 weeks
 
 
ToupTek USB 3.0 color astro camera with powerful Sony CMOS sensor for astrophotography - with very small pixels for high resolution
  • Air cooling against sensor heating
  • 1" sensor SONY Exmor CMOS IMX183, color, back-illuminated
  • 13.06 x 8.76 mm size, diagonal 15.9 mm
  • 5440 x 3648 pixels - 20 MP
  • Extremely high resolution due to 2.4 µm pixel size
  • Connection on telescope side: M42x0.75 female thread, 2" barrel
  • Working distance only 17.5 mm from the barrel
  • Built-in UV/IR filter
  • Binning is supported
 
653.00 €
Estimated delivery time : 1-4 days
 
 

Very easy to operate via ASCOM drivers or standalone software, it will make your life easier by automatically adjusting your camera field with precision.

  • 6 kg payload, but only 0.7 kg weight
  • M54 connections avoid vignetting of large sensors
  • Comes with adaptors for 2" receptacles and M48 camera rings
  • Needs only 19 mm back focus
  • Controlled via USB 2.0, no proprietary cable needed
  • Uses ASCOM 6 for control, INDI support will follow
  • Aluminum design increases rigidity
624.00 €
Estimated delivery time : 1-4 weeks
 
 
Compact filter wheel for ZWO MONO CCD cameras - perfect for astrophotography with L-RGB filters and nebula filters
614.00 €
Estimated delivery time : 1-4 days
 
 
LED technology for a colour-neutal, pure white image, absolutely flicker-free
604.00 €
Estimated delivery time : 1-4 days
 
 
Ultra-sensitive USB 3.0 all-round color camera with large Sony IMX485 Exmor CMOS sensor and high 4K resolution plus ST4 guider function
599.00 €
Estimated delivery time : 3-4 days
 
 
ToupTek USB 3.0 monochrome astro camera with powerful Sony CMOS sensor for astrophotography - with very small pixels for high resolution
  • Air cooling against sensor heating
  • 1" sensor SONY Exmor CMOS IMX183, monochrome, back-illuminated
  • 13.06 x 8.76 mm size, diagonal 15.9 mm
  • 5440 x 3648 pixels - 20 MP
  • Extremely high resolution due to 2.4 µm pixel size
  • Connection on telescope side: M42x0.75 female thread, 2" barrel
  • Working distance only 17.5 mm from the barrel
  • Built-in protection windows
  • Binning is supported
599.00 €
Estimated delivery time : 1-4 days
 
 

Feature summary Altair Hypercam 585C CMOS Camera:

  • 5A 12v DC Power supply included, with 110-240v input.
  • IMX585 Colour 8.3mp Starvis 2 Back Illuminated CMOS Sensor
  • On-chip HGC, LCG and HDR Support
  • 3840 x 2160 pixel resolution
  • 2.9 um Square Pixels
  • 1/1.2-inch Optical Format
  • Sensor size: 11.14 x 6.26 mm (12.85mm Diagonal)
  • 12-bit ADC (with 16bit output in HDR mode)
  • 512Mbyte DDR3 Memory buffer
  • Low Noise: 0.65 to 0.5e- in HCG mode
  • Fast Frame Rate 47 FPS in 8bit mode
  • Binning from 1x1 to 8x8 in either stacking or averaging modes.

579.00 €
Estimated delivery time : 3-4 weeks
 
 
The C0 and C1 series cameras with global shutter CMOS sensors were designed to be small, lightweight imagers for Moon and planets and for automatic telescope guiding.
543.00 €
Estimated delivery time : 1-2 weeks
 
 
This astro camera and autoguider offers sensational sensitivity, a modern sensor, and all of this in an ultra-compact housing, not bigger than a 1.25" eyepiece.
539.00 €
Estimated delivery time : 1-4 days
 
 

The ASI 482 CMOS color camera offers a very high sensitivity with a QE of 85% and a large modern Sony sensor for all applications in astrophotography.

  • Sony IMX 482 2 MP backlit sensor
  • Sensor size 11.1 x 6.2 mm - diagonal 12.86 mm
  • 1920 x 1080 pixels with up to 83 fps
  • 5.8 µm pixel - ideal for Maksutovs or Cassegrains for optimal resolution
  • Sony Starvis and Exmor-R technology
  • USB 3.0 for fast image download - also compatible with USB 2.0
  • Video astronomy and EAA with up to 83 frames per second possible
  • ST4-level autoguider interface included
  • AR protection filter built in with full transmission even in infrared
539.00 €
Estimated delivery time : 1-4 days
 
 
The C0 and C1 series cameras with global shutter CMOS sensors were designed to be small, lightweight imagers for Moon and planets and for automatic telescope guiding.
529.00 €
Estimated delivery time : 1-2 weeks
 
 
ATIK Mono CCD Camera and high sensitive autoguider - uncooled..
518.00 €
Estimated delivery time : 1-4 days
 
 

Die Colorkamera bietet einen großen Sensor, hohe Empfindlichkeit, Auflösung und Bildrate. Sie ist hervorragend für Planeten, aber auch für Sonne sowie Mond geeignet, und selbst für Deep Sky.

  • Sensor: 1/1,2" CMOS IMX585 mit 8,29 Megapixeln Auflösung
  • Sensorgröße: 6,26 mm x 11,13 mm - Diagonale: 12,84 mm
  • Sehr hohe Auflösung: 3840 x 2160 Pixel mit 2,9 µm Größe
  • Ca. 91 % QE - hohe Empfindlichkeit für kurze Belichtungszeiten
  • Durch hohe Bildrate von 47 fps auch gut für EAA geeignet
  • Full Well Kapazität 40 ke-
  • Starvis 2 Technologie mit Back Illumination
  • USB 3.0 für schnellen Download der Bilder
  • 12 bit ADC
  • Kein Verstärkerglühen (amp glow)
  • Passive Kühlung mit Wärmeableitung gegen ein Erwärmen des Sensors bei Langzeitbelichtung
  • Gute Eignung für Deep Sky Aufnahmen
  • AR Schutzfilter eingebaut mit vollem Durchlass auch im Infraroten
  • Inklusive ST4-Level Autoguidingschnittstelle
515.00 €
Estimated delivery time : 1-4 days
 
 
Complete package with corrector, off-axis guider and adapter for successful astrophotography
505.00 €
Estimated delivery time : 1-4 days
 
 
Feature summary Altair 2210M CMOS Camera:
  • SC 2210 Mono CMOS Sensor
  • 1920 x 1080 pixel resolution:
  • 4 um Square Pixels
  • 1/1.8-inch Optical Format
  • 12-bit ADC
  • 512mb DDR3 Memory
  • G Sensitivity: 20100mv/lux*s
  • Low Noise: : 0.47 to 3.2e-  
  • Fast Frame Rate 50 FPS in 8bit mode
  • Binning from 1x1 to 8x8 in either stacking or averaging modes.
479.00 €
Estimated delivery time : 3-4 weeks
 
 
Feature summary Altair 2210C CMOS Camera:
  • SC 2210 Colour CMOS Sensor
  • 1920 x 1080 pixel resolution:
  • 4 um Square Pixels
  • 1/1.8-inch Optical Format
  • 12-bit ADC
  • 512mb DDR3 Memory
  • G Sensitivity: 20100mv/lux*s
  • Low Noise: : 0.47 to 3.2e-  
  • Fast Frame Rate 50 FPS in 8bit mode
  • Binning from 1x1 to 8x8 in either stacking or averaging modes.
479.00 €
Estimated delivery time : 3-4 weeks
 
 
Die Altair GPCAM3 287M ist eine spezielle Sonnen-, Planeten- und Guiding-Kamera mit einer extrem schnellen Bildrate und Global Shutter.
459.00 €
Estimated delivery time : 2-4 weeks
 
 
The C0 and C1 series cameras with global shutter CMOS sensors were designed to be small, lightweight imagers for Moon and planets and for automatic telescope guiding.
439.00 €
Estimated delivery time : 1-2 weeks
 
 
ALCCD Filterwheel for 5 x 2" Filter with Motor.
436.00 €
Estimated delivery time : 1-4 days
 
 
The C0 and C1 series cameras with global shutter CMOS sensors were designed to be small, lightweight imagers for Moon and planets and for automatic telescope guiding.
429.00 €
Estimated delivery time : 1-2 weeks
 
 
ASIAIR Plus allows control of all ASI USB 3.0, ASI Mini cameras, selected DSLR and mirrorless system cameras, and mounts via smartphone or tablet.
  • Complete control of your camera, autoguider and automatic tracking of your mount via your smartphone or tablet
  • Large memory capacity of 256 GB
  • Wireless control - no tangled wires between mount, camera and computer
  • Standalone autoguider function in combination with a suitable camera like the ASI120Mini - ideal for all astrophotographers with DSLR, no more need for a computer in the field
  • Image preview and focusing assistance in real time for convenient and precise focusing
  • Debayer for all ASI color astro cameras with image processing
  • Almost all mounts are supported, e.g. Skywatcher or iOptron
  • ASIAIR works with iOS and Android operating system
  • Simple to use and interface with clearly arranged surface
  • ASIAIR supports also DSLR cameras and mirrorless system cameras
  • Finder bracket is included in the scope of delivery, so ASIAIR can be mounted on the telescope instead of a finder.
  • The microSD card slot of the previous versions has been removed. You can use USB memory sticks or transfer the data to a computer via the USB-C port.
 
429.00 €
Estimated delivery time : 1-4 days
 
 
ZWO CAA Camera Angle Adjuster Electronic Rotator

The motorized 360° rotator enables the optimal camera position to the object - also ideal for remote astrophotography


Thread telescope side - M54x0.75 Thread camera side - M54x0.75 and M48x0.75 Overall length - 16.5 mm Weight only 465 grams supported by ASI Air, ASI Studio and ASCOM
425.00 €
Estimated delivery time : 1-4 days
 
 
LED technology for a colour-neutal, pure white image, absolutely flicker-free
421.00 €
Estimated delivery time : 2-3 days
 
 

Feature summary Altair 678M CMOS Camera:

  • IMX678 Starvis 2 CMOS Sensor
  • On-chip HGC and LCG Support
  • 3840 x 2160 pixel resolution:
  • 2 um Square Pixels
  • 1/1.8-inch Optical Format
  • 12-bit ADC
  • 512mb DDR3 Memory
  • G Sensitivity: 3637mv
  • Low Noise: 0.42 to 2.43e- 
  • Fast Frame Rate 47 FPS in 8bit mode
  • Binning from 1x1 to 8x8 in either stacking or averaging modes.
409.00 €
Estimated delivery time : 4 weeks
 
 

Powerful monochrome astro camera with very fast Sony 2.1 megapixel sensor - with autoguiding connector

  • Powerful BW camera for lunar and planetary photography and for deep-sky photography
  • Highly sensitive in the infrared range - helps to suppress bad seeing
  • Resolution 2.1 MP - 1936 x 1096 PX
  • Pixel size 2.9 µm
  • Sensor: 1/2.8" CMOS IMX462 with very high quantum efficiency (sensitivity) and low readout noise
  • DDR Memory Buffer 256 MB - buffer for a more stable data transport
  • Includes 2.1 mm all-sky lens for spectacular overview shots - with T2 connection thread
  • Maximum 136.1 fps (frames per second) at full resolution
  • Short download time through USB 3.0
  • Extremely compact - only 62 mm x 36 mm
  • Autoguiding connector (ST-4)
  • AR protection filter built-in - full transmission even in infrared
399.00 €
Estimated delivery time : 1-4 days
 
 
Guiding Kit AR90/500
399.00 €
Estimated delivery time : 3-4 days
 
 
The new 36 mm EFW (Electronic Filter Wheel) for astronomical mono cameras will give a much easier and more fixable way to connect to ASI cameras.
399.00 €
Estimated delivery time : 1-4 days
 
 
The ADC Mark II corrects the dispersive effects of earth´s atmosphere. You will get sharper images of planets and moon.
395.00 €
Estimated delivery time : 2-5 months (as from Availability)
Availability acc. to manufacturer :
May 17 2025
High quality FireWire 1/3" color astronomy camera including 1 1/4" connecting adapter.
392.00 €
Estimated delivery time : 1-4 days
 
 
High quality FireWire 1/2" color astronomy camera including 1 1/4" connecting adapter.
392.00 €
Estimated delivery time : 1-4 days
 
 
High quality FireWire 1/2" color astronomy camera including 1 1/4" connecting adapter.
392.00 €
Estimated delivery time : 1-2 months
 
 

Feature summary Altair 678C CMOS Camera:

  • IMX678 Colour Starvis 2 CMOS Sensor
  • On-chip HGC and LCG Support
  • 3840 x 2160 pixel resolution:
  • 2 um Square Pixels
  • 1/1.8-inch Optical Format
  • 12-bit ADC
  • 512mb DDR3 Memory
  • G Sensitivity: 3637mv
  • Low Noise: 0.42 to 2.43e- 
  • Fast Frame Rate 47 FPS in 8bit mode
  • Binning from 1x1 to 8x8 in either stacking or averaging modes.
389.00 €
Estimated delivery time : 1-2 weeks
 
 

Feature summary Altair 678C CMOS Camera:

  • IMX678 Colour Starvis 2 CMOS Sensor
  • On-chip HGC and LCG Support
  • 3840 x 2160 pixel resolution:
  • 2 um Square Pixels
  • 1/1.8-inch Optical Format
  • 12-bit ADC
  • 512mb DDR3 Memory
  • G Sensitivity: 3637mv
  • Low Noise: 0.42 to 2.43e- 
  • Fast Frame Rate 47 FPS in 8bit mode
  • Binning from 1x1 to 8x8 in either stacking or averaging modes.
389.00 €
Estimated delivery time : 1-2 weeks
 
 
The camera offers a very high resolution and can be used for lunar and planetary photography, EAA and also for deep sky astrophotography.
  • SONY STARVIS 2 technology - back illuminated pixel technology
  • USB 3.0 for fast download of images
  • No more amp glow detectable
  • Passive cooling with heat dissipation against heating of the sensor during long time exposures
  • Good suitability for deep sky imaging
  • Rich field lens (removable) included in scope of delivery



388.00 €
Estimated delivery time : 1-4 days
 
 

Feature summary Altair 664C CMOS Camera:

  • IMX664C Colour CMOS Sensor
  • On-chip HGC, LCG and HDR Support
  • Resolution: 2688 x 1520 (4.1mp)
  • 2.9 um Square Pixels
  • Diagonal 9.02 mm (Type 1/1.8 Optical Format)
  • 12-bit ADC
  • 512 Mbyte Memory
  • Sensitivity: 2000 m V or more per 1 µm2
  • Low Noise: 6.2 – 0.69 e-
  • High Frame Rate 97 FPS @ 2688*1520 8bit mode
  • Binning from 1x1 to 8x8 in either stacking or averaging modes.
369.00 €
Estimated delivery time : 1 week
 
 

Feature summary GPCAM3 462C:

  • 1920 x 1080 Resolution 
  • 2.9 um Square Pixels
  • 1/2.8-inch sensor format
  • 5.57mm x 3.13mm sensor size
  • Low Read Noise: 0.49 to 2.1e- 
  • High Frame Rate 152 FPS 8 bit
  • 12-bit ADC
  • Binning from 1x1 to 8x8 in either stacking or averaging modes.
349.00 €
Estimated delivery time : 3-4 weeks
 
 
ALccd-QHY PoleMaster
339.00 €
Estimated delivery time : 3-4 days
 
 
The Altair GPCAM2 178M Monochrome camera has the sought after Sony Exmor IMX178M CMOS sensor, with high sensitivity, and extremely low read noise.
369.00 € 332.00 €
Estimated delivery time : 2-4 weeks
 
 
Perfectly suitable for Newtonians with focal ratios of f/4, very good results also from f/3.5-f/6
329.00 €
Estimated delivery time : 1-4 days
 
 
The Altair GPCAM3 290M monochrome camera has the sought after Sony Exmor IMX290 CMOS sensor, with high sensitivity, and extremely low read noise
309.00 €
Estimated delivery time : 1-4 weeks
 
 
Die Altair GPCAM3 224C Kamera verfügt über den begehrten Full HD Sony IMX224 CMOS Sensor mit extrem niedrigem Leserauschen und 1.2MPx Auflösung.
309.00 €
Estimated delivery time : 1-4 weeks
 
 
The Altair GPCAM3 290C Colour camera has the sought after Sony Exmor IMX290 CMOS sensor, with high sensitivity, and extremely low read noise
309.00 €
Estimated delivery time : 1-4 weeks
 
 
Key features:
  • 8.3mp sensor with 1.45 micron pixels
  • 7.7mm x 4.3mm active sensor area.
  • Low read noise, approx. 1.35 - 0.57 electrons (e-) or better.
  • Saturation (full well) capacity approx. 6.0Ke- electrons (e-)
  • High Dynamic Range with 12 bit ADC for high image quality in both light and dark (high contrast) areas.
 
309.00 €
Estimated delivery time : Unbekannte Lieferzeit
 
 

Feature summary Altair 662C CMOS Camera:

  • IMX662 Colour CMOS Sensor with on-chip HGC, LCG and HDR Support
  • Resolution: 1920 x 1080
  • 2.9 um Square Pixels
  • 1/2.8-inch Optical Format
  • 12-bit ADC
  • 512 Mbyte Memory
  • G Sensitivity: 5612mv with 1/30s
  • Low Noise: 0.46 to 5.35e- 
  • High Frame Rate 47 FPS  8 bit
  • Binning from 1x1 to 8x8 in either stacking or averaging modes.

305.00 €
Estimated delivery time : 3-4 weeks
 
 

Feature summary GPCAM3 462M:

  • 1920 x 1080 Resolution 
  • 2.9 um Square Pixels
  • 1/2.8-inch sensor format
  • 5.57mm x 3.13mm sensor size
  • Low Read Noise: 0.49 to 2.1e- 
  • High Frame Rate 152 FPS 8 bit
  • 12-bit ADC
  • Binning from 1x1 to 8x8 in either stacking or averaging modes.
299.00 €
Estimated delivery time : 3-4 weeks
 
 

Feature summary GPCAM3 462C:

  • 1920 x 1080 Resolution 
  • 2.9 um Square Pixels
  • 1/2.8-inch sensor format
  • 5.57mm x 3.13mm sensor size
  • Low Read Noise: 0.49 to 2.1e- 
  • High Frame Rate 152 FPS 8 bit
  • 12-bit ADC
  • Binning from 1x1 to 8x8 in either stacking or averaging modes.
299.00 €
Estimated delivery time : 3-4 weeks
 
 
The flatfield box has a bright, homogeneous illuminated screen, which is simply attached with screws
299.00 €
Estimated delivery time : 1-4 days
 
 

The camera offers an extremely high resolution and is optimized for lunar and planetary photography without additional Barlow directly in the focus of the telescope.

  • Sensor: 1/28" CMOS IMX715 with 8.46 megapixel resolution
  • Sensor size: 5.6 mm x 3.2 mm - Diagonal: 6.45 mm
  • Extremely high resolution: 1.45 µm pixel size
  • SONY STARVIS 2 technology - back illuminated pixel technology
  • With approx. 80 % QE a high sensitivity for short exposure times
  • Ideal for moon and planets but also for small deep-sky objects and high-resolution microscope photography
  • USB 3.0 for fast image download
  • Low readout noise (from 0.72 e-)
  • Well suited for EAA due to high frame rate of 45.1 fps
  • 12 bit ADC
  • No more amp glow detectable
  • Passive cooling with heat dissipation to prevent the sensor from heating up during long exposures
  • Wide field lens (detachable) included in scope of delivery
  • AR protection filter built in with full transmission even in the infrared band
  • Including ST4-level autoguiding interface
299.00 €
Estimated delivery time : 1-4 days
 
 
SW Guiding and Planetary Camera with Micron CMOS Sensor.
296.00 €
Estimated delivery time : 3-4 days
 
 

ASIAIR Mini allows control of all ASI USB 3.0, ASI Mini cameras, selected DSLR and mirrorless cameras, and mounts via smartphone or tablet.

  • Complete control of your camera, autoguider and automatic tracking of your mount via your smartphone or tablet
  • Wireless control - no tangled wires between mount, camera and computer
  • Standalone autoguider function in combination with a suitable camera like the ASI120Mini - ideal for all astrophotographers with DSLR, no more need for a computer in the field
  • Image preview and focusing assistance in real time for convenient and precise focusing
  • Debayer for all ASI color astro cameras with image processing
  • Almost all mounts are supported, e.g. Skywatcher or iOptron
  • ASIAIR works with iOS and Android operating system
  • Simple to use and interface with clearly arranged surface
  • ASIAIR supports also DSLR and mirrorless cameras
295.00 €
Estimated delivery time : 1-4 days
 
 
Start now with digital astrophotography and capture the Sky with the brand new BRESSER Full HD Deep-Sky Camera with Autoguider build from the premium-class manufacturer Touptek.
289.00 €
Estimated delivery time : 1-4 days
 
 
The Altair GPCAM2 290M monochrome Camera has the sought after Sony Exmor IMX290 CMOS sensor, with high sensitivity, and extremely low read noise
289.00 €
Estimated delivery time : 1-4 weeks
 
 
The GPCAM2 327C is a colour CMOS camera with extremely high sensitivity, designed for video astronomy or EAA.
279.00 €
Estimated delivery time : 2-4 weeks
 
 
Fits directly to the 3" correctors by ASA (Astro Systems Austria)
279.00 €
Estimated delivery time : 1-4 days
 
 

This off-axis guider from ASKAR convinces with a versatile adaptation for almost all telescopes and cameras - usable up to full frame format.

  •  Connections at the telescope side: M54x0.75, M48x0.75 and T2 (M42x0.75) female thread
  •  Connections at the camera side: M54x0.75, M48x0.75 and T2 (M42x0.75) male thread
  •  Three orientations of the camera to the off-axis guider are possible
  •  The optically effective length of the OAG is 19.5 mm, the external thread on the camera side does not count.
  •  Sufficient space for a filter wheel or filter drawer between OAG and the camera, also for correctors with 55 mm working distance
  •  Side mount 1.25" connector and T2 male thread with fine focusing - always a sharp guiding star
  •  Large 10x10 mm prism for a large field for the autoguider
  •  Prism with prism holder can be adjusted for best possible illumination
275.00 €
Estimated delivery time : 1-4 days
 
 
Atik Off Axis Guider with M54 and 2" connection for big camera sensors..
266.00 €
Estimated delivery time : 1-4 days
 
 
Additional telescope/lens adapter Nikon (compatible with C1 and C1+ camera with T-thread)
259.00 €
Estimated delivery time : 1-2 weeks
 
 
The Altair GPCAM2 290C Colour camera has the sought after Sony Exmor IMX290 CMOS sensor, with high sensitivity, and extremely low read noise
259.00 €
Estimated delivery time : 1-4 weeks
 
 
High quality FireWire color astronomy camera including 1 1/4" connecting adapter.
258.00 €
Estimated delivery time : 1-4 weeks
 
 
SW Guiding and Planetary Camera with Micron CMOS Sensor.
255.00 €
Estimated delivery time : 1-4 days
 
 
Reduces the focal length of telescopes with the factor 0.67x, thus allowing shorter exposure times.
254.00 €
Estimated delivery time : 1-4 days
 
 
Ultra compact filter wheel for ZWO MONO CCD cameras - perfect for astrophotography with L-RGB filters.
247.00 €
Estimated delivery time : 1-4 days
 
 
The flatfield box has a bright, homogeneous illuminated screen, which is simply attached with screws
239.00 €
Estimated delivery time : 1-4 days
 
 

This device has 6 x USB 3.1 Ports. All ports are backwards compatible with USB 1.0 and USB 2.0 devices. Moreover, each port can deliver up to 2.5 A of current.

  • Ports switchable (power and data), ASCOM supported
  • Current of every port is monitored
  • Hub supplied with 12 to 14 V
  • Supports industrial grade temperature range from -40 °C to +85 °C
  • Robust aluminum enclosure
239.00 €
Estimated delivery time : 1-4 days
 
 
The Lacerta flatfield box is used to create flats, which are necessary for the accurate calibration of astrofotos. The vignetting (darker edge) and shadows of dust particles can thus be eliminated.
230.00 €
Estimated delivery time : 3-4 days
 
 
Very high sensitivity in the far red / NIR region makes the GPCAM2 AR0130 especially good for solar imaging with the Daystar Quark other Hydrogen Alpha filters.
229.00 €
Estimated delivery time : 1-4 weeks
 
 
The new ZWO ASI120MM Mini (mono) is a highly sensitive planetary camera and an outstanding autoguider for astrophotography in a 1.25" body
227.00 €
Estimated delivery time : 2-3 days
 
 
Atik T2 adapter for Atik One Kit (adaptations without Off Axis Guider) ..
223.00 €
Estimated delivery time : 1-4 days
 
 
Very high sensitivity in the far red / NIR region makes the GPCAM2 224c especially good for solar imaging with the Daystar Quark other Hydrogen Alpha filters.
219.00 €
Estimated delivery time : 1-4 weeks
 
 
The flatfield box has a bright, homogeneous illuminated screen, which is simply attached with screws
214.00 €
Estimated delivery time : 1-4 days
 
 
SW Guiding and Planetary Camera with Micron CMOS Sensor.
204.00 €
Estimated delivery time : 3-4 days
 
 
Ideal solution for astrophotography with Canon EOS DSLR cameras.
199.00 €
Estimated delivery time : 1-4 days
 
 
Off axis guider for large cameras
199.00 €
Estimated delivery time : 1-4 days
 
 
The flatfield box has a bright, homogeneous illuminated screen, which is simply attached with screws
199.00 €
Estimated delivery time : 1-4 days
 
 
Omegon 1.25" Filter Wheel - change your filter in seconds
189.00 €
Estimated delivery time : 1-4 days
 
 
The Lacerta flatfield box is used to create flats, which are necessary for the accurate calibration of astrofotos. The vignetting (darker edge) and shadows of dust particles can thus be eliminated.
180.00 €
Estimated delivery time : 2-3 days
 
 
Filter change in a few seconds without removing the camera, ideal for astrophotography - the filter holder is the compact and lightweight alternative to the filter wheel.
169.98 €
Estimated delivery time : 1-4 days
 
 
Camera Tilting Unit to adjust the tilt of the focal plane when using Canon EOS lenses with CCD cameras
169.00 €
Estimated delivery time : 3-4 days
 
 
Camera Tilting Unit to adjust the tilt of the focal plane when using Nikon lenses with CCD cameras
169.00 €
Estimated delivery time : 3-4 days
 
 
Attach your Altair Hypercam camera to a Nikon photographic lens for wide-field astrophotography
159.00 €
Estimated delivery time : 2-4 weeks
 
 
Attach your Altair Hypercam camera to a Canon EOS photographic lens for wide-field astrophotography
159.00 €
Estimated delivery time : 1-4 weeks
 
 
Attach your Altair Hypercam camera to a Nikon photographic lens for wide-field astrophotography
159.00 €
Estimated delivery time : 1-4 weeks
 
 
The Lacerta flatfield box is used to create flats, which are necessary for the accurate calibration of astrofotos. The vignetting (darker edge) and shadows of dust particles can thus be eliminated.
150.00 €
Estimated delivery time : 1-4 days
 
 
Additional telescope/lens adapter EOS (compatible with C1 and C1+ camera with T-thread)
149.00 €
Estimated delivery time : 1-2 weeks
 
 
Die neue Filterschublade für EOS Objektive wurde von ZWO speziell für gekühlte ASI-Kameras entwickelt.
145.00 €
Estimated delivery time : 1-4 days
 
 
Attach your Altair Hypercam camera to a Canon EOS photographic lens for wide-field astrophotography
159.00 € 143.00 €
Estimated delivery time : 1-4 weeks
 
 
Allsky camera lens 180 Degree FOV 1/2 1.55mm f2 CS mount for CMOS camera
  • Clear bright and sharp image from horizon to horizon for your Allsky Camera.
  • Capture meteors, aurora, space stations and satellites over the entire sky.
  • 1/2" camera chip will give you a full 180 degree plus image circle.
  • 1/3" chip will have slightly clipped top and bottom edges.
  • Fits Altair, ZWO, QHY and other Allsky CMOS cameras.
  • Colour or mono NIR corrected.
139.00 €
Estimated delivery time : 1-2 weeks
 
 
Can be used with almost every telescope, especially suitable for adaptions where only little space is available
119.00 €
Estimated delivery time : 1-4 days
 
 
Especially stable off-axis guider for heavy CCD cameras.
119.00 €
Estimated delivery time : 1-4 days
 
 
This set contains all adapters necessary to achieve the correct back focus
119.00 €
Estimated delivery time : 1-4 weeks
 
 
The ZWO filter drawer with M54 connection is made for all cameras with M54x0.75 thread connection, for example ASI6200MM and ASI6200MC
119.00 €
Estimated delivery time : 1-4 days
 
 
One of the most versatile solutions for multiple connections - for observation and imaging
119.00 €
Estimated delivery time : 1-4 days
 
 
Power splitter box with 7 outputs: 4x fix (12V, RCA), 2x dimmed (1-12V, RCA) 1x USB (5V USB). Input: EQ8 plug. Inclusive
114.00 €
Estimated delivery time : 3-4 days
 
 
Adapter to M48x0,75 male / 2" filter thread with only 4mm lengh
109.00 €
Estimated delivery time : 1-4 weeks
 
 
Quick change between centering eyepiece and camera simply by turning a lever
104.00 €
Estimated delivery time : 1-4 days
 
 
WIFI connection; connect your smartphone for remote control; suitable for bird watching photography and target training; allow you to see the surface of the target in real time on your phone; greatly improve efficiency and comfort

Feature:

  • Universal Spotting scope WIFI Camera
  • The device generates its own Wi-Fi Hotspot
  • Mobile phone App, the app is a full-featured software application available for free
  • Universally Mounts directly to spotting scopes with 1.25-inch diameter eyepiece
  • Rechargeable LiPo Battery (estimated 1500mAh for 3-4 hour battery life)
  • Compatible with current Svbony Camera App
  • Capture pictures/videos directly through phone APP, then download and share to social media asap.
149.00 € 100.00 €
Estimated delivery time : 1-2 days
 
 
The USM-2 is a simple and flexible way to connect your smartphone to your APM (or similar) Spektiv with HR eyepiece and take high magnification photos and video.
99.00 €
Estimated delivery time : 1-2 days
 
 
This adapter connects accessories with M68x1 thread to the 3 inch Apo corrector of TS Optics
99.00 €
Estimated delivery time : 1-4 weeks
 
 
Manufactured according to your specification
99.00 €
Estimated delivery time : 1-4 weeks
 
 
This Adapter allows a screwed connection between the TS Gigant Off Axis Guider and TeleVue reducers and correctors
99.00 €
Estimated delivery time : 1-4 days
 
 
It's so stable, even long exposures are possible, thanks to a metal clamping mechanism for both eyepiece and phone body. Way better than cheap all-plastic smartphone adapters.

Dimensions:
    Fits eyepieces with outer diameter of 31mm to 55mm
    Minimum smartphone size: 101x53mm (LxW)
    Maximum smartphone size: 210x110mm (LxW)
 
99.00 €
Estimated delivery time : 1-3 weeks
 
 
Connect your CCD camera to the Canon EOS bayonet and use your high-quality lenses for astrophotography.
99.00 €
Estimated delivery time : 1-4 days
 
 
Use Canon EOS lenses for wide-field photography with an ASI camera from ZWO.
99.00 €
Estimated delivery time : 1-4 days
 
 
Thanks to its robust design and ease of use, the Tilt Adjuster Plate is an indispensable tool for photographers who want to get the best out of their Altair Hypercam TEC camera. It not only improves image quality, but also helps to ensure that the entire shooting equipment is stable and reliable.
90.00 €
Estimated delivery time : 1 week
 
 
This set contains all adapters necessary to achieve the correct back focus
89.90 €
Estimated delivery time : 1-4 weeks
 
 
Smartphone Camera Adapter
89.00 €
Estimated delivery time : Unbekannte Lieferzeit
 
 
Fits directly to the M54 thread of CCD cameras e.g. by Atik or Moravian
89.00 €
Estimated delivery time : 1-4 days
 
 
The adapter allows mounting of Canon EOS camera lenses to ZWO ASI cooled cameras.
84.00 €
Estimated delivery time : 1-4 days
 
 
The adapter ROT1 accepts 2" filters, enables a quick coupling and 360° rotation - the adapter has T2 threads on both sides
79.90 €
Estimated delivery time : 1-4 days
 
 
The new, robust and cheap 5 position Filterwheel for 1,25" Filter by Skywatcher.
80.00 € 74.00 €
Estimated delivery time : 1-4 days
 
 
Finally, a camera that you can connect to both your telescope and your microscope. Save yourself the expense of having to get a second camera! From ....
69.00 €
Estimated delivery time : 3-4 days
 
 
Use Canon EOS lenses with the ZWO filter wheel and an ASI camera from ZWO for wide-field photography.
62.90 €
Estimated delivery time : 1-4 days
 
 
Altair GPCAM Wide Angle Meteor Lens Kit
62.00 €
Estimated delivery time : 1-4 weeks
 
 
VIXEN WEIGHT SHAFT CAMERA BRACKET 
59.00 €
Estimated delivery time : 3-4 days
 
 
The adaptor allows 360° rotation on all focusers with M54x0.75 connection thread on the eyepiece side
59.00 €
Estimated delivery time : 1-4 weeks
 
 
This filter slider holds a mounted 2" filter and fits into the Altair version 2 magnetic filter holders.
59.00 €
Estimated delivery time : 1-4 days
 
 
The adapter allows mounting of Canon EOS camera lenses to ZWO ASI cooled cameras.
59.00 €
Estimated delivery time : 1-4 days
 
 
Additional telescope/lens adapter (compatible with C1 and C1+ camera with T-thread)
53.00 €
Estimated delivery time : 1-2 weeks
 
 
Additional telescope/lens adapter (compatible with C1 and C1+ camera with T-thread)
53.00 €
Estimated delivery time : 1-2 weeks
 
 
This filter slider holds a mounted 1.25" filter and fits into the Altair version 2 magnetic filter holders.
52.00 €
Estimated delivery time : 1-4 days
 
 
Allows adapting the Zeiss M68 system to the N-AGK3 and the VIP-3010-Paracorr
51.00 €
Estimated delivery time : 1-4 days
 
 
The adapter allows the connection of M54x0.75 accessories like M54 filter drawers or M68 OAG and 2" filter ...
49.90 €
Estimated delivery time : 1-4 days
 
 
The dovetail groove is designed for ASIAIR PRO to connect Vixen style dovetail plates.
49.00 €
Estimated delivery time : 1-4 days
 
 
Ideal for lunar and planetary imaging with DSLR cameras
49.00 €
Estimated delivery time : 1-4 days
 
 
Complete set for starting in astrophotography at little cost
49.00 €
Estimated delivery time : 1-4 days
 
 
 Cable guide suitable for ZWO ASIAIRPLUS and PRO.
  • Suitable for ZWO ASIAIR Plus and Pro
  • Lightweight plastic design
  • Color matching to ZWO products
  • Dimensionally stable up to 80 °C due to the use of PETG for 3D printing

48.00 €
Estimated delivery time : 3-4 days
 
 
 Cable guide suitable for ZWO ASIAIR MINI
  • Suitable for ZWO ASIAIR Mini
  • Lightweight plastic design
  • Color matching to ZWO products
  • Dimensionally stable up to 80 °C due to the use of PETG for 3D printing
48.00 €
Estimated delivery time : 3-4 days
 
 
The Hypercam 2inch nosepiece is precision machined with a straight sided barrel. This allows for more repeatable collimation in your 2" focuser or extension tube.
48.00 €
Estimated delivery time : 1-4 weeks
 
 
C1 adapter M48x0,75 BF 16.5 mm with four M3 threaded holes. (Note: assembly without spring and pushing screws!)
47.00 €
Estimated delivery time : 1-2 weeks
 
 
Adapter to 2" filter thread or  T2
44.00 €
Estimated delivery time : 1-4 days
 
 
Connects an Altair Hypercam PRO FAN cooled camera to an existing Hypercam Nikon lens adapter
39.00 €
Estimated delivery time : 1-4 weeks
 
 
Connects an Altair Hypercam PRO TEC Cooled camera to an existing Hypercam Nikon lens adapter
39.00 €
Estimated delivery time : 1-4 weeks
 
 
Additional telescope/lens adapter 1.25" (compatible with C1 camera)
39.00 €
Estimated delivery time : 1-2 weeks
 
 
Connects an Altair Hypercam PRO TEC Cooled camera to an existing Hypercam Nikon lens adapter
39.00 €
Estimated delivery time : 1-4 weeks
 
 
Connects an Altair Hypercam PRO Fan Cooled camera to an existing Hypercam Canon EOS lens adapter
39.00 €
Estimated delivery time : 1-4 weeks
 
 
Altair 2" Adapter für GPCam CMOS Kameras
39.00 €
Estimated delivery time : 1-4 weeks
 
 
Whether youre doing planetary visual observing, planetary imaging, or deep sky imaging, the Bahtinov Mask is a great accessory to get the best focus ...
39.00 €
Estimated delivery time : 2-4 weeks
 
 
Permits very precise focusing. You can easily identify the optimal focus position
38.00 €
Estimated delivery time : 1-4 days
 
 
For perfect distance fine tuning
37.00 €
Estimated delivery time : 1-4 days
 
 
MGEN parfokal adaptor for Takahashi 7x50 and Skywatcher 9x50 finderscope
35.00 €
Estimated delivery time : 3-4 days
 
 
Permits very precise focusing. You can easily identify the optimal focus position
33.00 €
Estimated delivery time : 1-4 days
 
 
Altair GPCAM & Hypercam 0.5x Reducer - Auto Guiding EAA Video Astronomy Solar
32.00 €
Estimated delivery time : 1-4 weeks
 
 
Permits very precise focusing. You can easily identify the optimal focus position
32.00 €
Estimated delivery time : 1-4 days
 
 
The finder shoe has a flat support surface and fits on ZWO Asiair Pro and on the holding rings for ZWO cameras.
32.00 €
Estimated delivery time : 1-4 days
 
 
Offers more free aperture than T2 for less vignetting
31.00 €
Estimated delivery time : 1-4 days
 
 
Also suitable for all TSOAG9EOS which have been sold from July 2018
29.00 €
Estimated delivery time : 1-4 days
 
 
Permits very precise focusing. You can easily identify the optimal focus position
29.00 €
Estimated delivery time : 1-4 days
 
 
Offers more free aperture than T2 for less vignetting
27.00 €
Estimated delivery time : 1-4 days
 
 
Permits very precise focusing. You can easily identify the optimal focus position
27.00 €
Estimated delivery time : 1-4 days
 
 
Offers more free aperture than T2 for less vignetting
27.00 €
Estimated delivery time : 1-4 days
 
 
Permits very precise focusing. You can easily identify the optimal focus position
26.00 €
Estimated delivery time : 1-4 days
 
 
TS-Optics adaptor from M48 filter thread to T2
25.90 €
Estimated delivery time : 1-4 days
 
 
Allows for connecting of camera side accessories with M48x0.75 / 2" filter thread
25.00 €
Estimated delivery time : 1-4 days
 
 
Permits very precise focusing. You can easily identify the optimal focus position
25.00 €
Estimated delivery time : 1-4 days
 
 
Permits very precise focusing. You can easily identify the optimal focus position
25.00 €
Estimated delivery time : 1-4 days
 
 
Permits very precise focusing. You can easily identify the optimal focus position
24.00 €
Estimated delivery time : 1-4 days
 
 
Modern autoguider like the Lacerta M-Gen are very efficient and offer a high resolution. For telescopes up to 8" aperture, even a 50 mm finder is sufficient for clean guiding with an autoguider.
24.00 €
Estimated delivery time : 1-4 days
 
 
This adaptor allows you to connect your Canon EOS camera to a telescope or spotting scope.
24.00 €
Estimated delivery time : 1-4 days
 
 
This Altair designed cable saver / tidy has a unique snap-on gate with holes of varying sizes to suit power, USB and data cables.
22.00 €
Estimated delivery time : 1 week
 
 
Permits very precise focusing. You can easily identify the optimal focus position
22.00 €
Estimated delivery time : 1-4 days
 
 
Skywatcher Adapter to use cameras with 1.25" nosepiece with the Skywatcher Flip Mirror.
23.00 € 21.27 €
Estimated delivery time : 1-4 days
 
 
EOS-1 Kabel für MGEN (3,5mm)
21.00 €
Estimated delivery time : 3-4 days
 
 
EOS-2 Cable for MGEN or UrsaMinor Intarface (f.e. for EOS-5D) Cablelength: 120cm
21.00 €
Estimated delivery time : 1-2 days
 
 
Turns an adapter with M48 male thread into an adapter with M48 female thread
20.00 €
Estimated delivery time : 1-4 days
 
 
Spacers (2mm, 1mm, 0.5mm) in order to increase the optical path between CCD camera and CTU by G. Neumann
19.90 €
Estimated delivery time : 3-4 days
 
 
This DC cable allows the connection of up to two standard dew heaters or dew heater controllers to the ASIAIR PRO.
19.00 €
Estimated delivery time : 1-4 days
 
 
Whether youre doing planetary visual observing, planetary imaging, or deep sky imaging, the Bahtinov Mask is a great accessory to get the best focus ...
19.00 €
Estimated delivery time : 1-3 weeks
 
 
Metal ring to set the correct distance between corrector and camera
14.00 €
Estimated delivery time : 1-4 days
 
 
Metal ring to set the correct distance between corrector and camera
14.00 €
Estimated delivery time : 1-4 days
 
 
Stainless steel ring for exact adjustment of the distance, e.g. from corrector to camera
13.00 €
Estimated delivery time : 1-4 days
 
 
The ring is simply slipped over the male M48 thread of the adapter
13.00 €
Estimated delivery time : 1-4 days
 
 
Stainless steel ring for exact adjustment of the distance, e.g. from corrector to camera
13.00 €
Estimated delivery time : 1-4 days
 
 
Stainless steel ring for exact adjustment of the distance, e.g. from corrector to camera
13.00 €
Estimated delivery time : 1-4 days
 
 
The ring is simply slipped over the male M48 thread of the adapter
13.00 €
Estimated delivery time : 1-4 days
 
 
The ring is simply slipped over the male M48 thread of the adapter
13.00 €
Estimated delivery time : 1-4 days
 
 
The ring is simply slipped over the male M48 thread of the adapter
13.00 €
Estimated delivery time : 1-4 days
 
 
Stainless steel ring for exact adjustment of the distance, e.g. from corrector to camera
13.00 €
Estimated delivery time : 1-4 days
 
 
Fine tuning ring for exact adjustment of the distance from corrector to camera
11.00 €
Estimated delivery time : 1-4 days
 
 
Fine tuning ring for exact adjustment of the distance from corrector to camera
11.00 €
Estimated delivery time : 1-4 days
 
 
Aluminium ring for exact adjustment of the distance, e.g. from corrector to camera
9.00 €
Estimated delivery time : 1-4 days
 
 
Aluminium ring for exact adjustment of the distance, e.g. from corrector to camera
9.00 €
Estimated delivery time : 1-4 days
 
 
Aluminium ring for exact adjustment of the distance, e.g. from corrector to camera
9.00 €
Estimated delivery time : 1-4 days
 
 
ToupTec sMAX16AM CMOS Kamera mit 9µm Pixel
Call for pricing
Estimated delivery time : 1-2 months