Mounting head with permanent 2 D pan/tilt attachment. The pan/tilt attachment being firmly mounted on the tripod provides outstanding stability. Photo head model 520 width sliding camera teaining screw. Double leg extension.
Mounting head with permanent 2 D pan/tilt attachment. The pan/tilt attachment being firmly mounted on the tripod provides outstanding stability. Video head model 520 Video with spring-loaded video-pin. Double leg extension.
The tripod Report 963 is equipped with the module insert 6, i.e. with a half ball with a diameter of 75 mm for the direct insertion of professional video tilt heads or a levelling unit (available as an accessory). The half ball ensures a pivoting range of 15° in all directions which leads to a quick and precise tripod adjustment. The levelling unit is fastened my means of the 80-mm wooden handle or the star knob. Double tripod leg extension. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.
Das Berlebach Stativ Sky ist eine Weltneuheit des traditionsreichsten Stativherstellers der Welt, speziell konzipiert für höchste Ansprüche ambitionierter Astronomen. Das Berlebach Stativ SKY kombiniert die besten Eigenschaften des Werkstoffes Holz mit den hervorragenden Attributen neuartiger Carbonwerkstoffe. Der äußerst flach gestaltete neue Stativkopf mit 105 mm breiter Stativbeinanbindung gewährleistet höchste Verwindungssteifigkeit. Durch den verwendeten Stativfuß aus Kohlefaser, der in einem neuartigen Verfahren hergestellt wird, erreicht man eine maximale Belastbarkeit bei sehr geringem Eigengewicht. Ebenso werden die Holzprofile durch ein patentiertes System mit Kohlefaser verstärkt. Das Stativ wird mit doppelten Klemmschellen geliefert. In der Summe der drei Innovationen wird ein Höchstmaß an Belastungsfähigkeit, maximaler Stabilität und Schwingungsdämpfung erreicht. Ein ausgezeichnetes Design unterstreicht den gehobenen Anspruch dieses Stativs, das das Herz jedes Astronomen höher schlagen lässt.
This tripod is ideal for filming assignments and is compatible with all professional video heads with a diameter of 100 mm. In addition, we offer a suitable 100 mm diameter leveling unit capabel of taking any tilt head as required. Without leg spread stops. The maximum height given below is that at an approx. 20° leg spread.
This tripod is ideal for filming assignments and is compatible with all professional video heads with a diameter of 75 mm. In addition, we offer a suitable 75 mm diameter leveling unit capabel of taking any tilt head as required. Without leg spread stops. The maximum height given below is that at an approx. 20° leg spread.
These tripod is ideal for filming assignments and is compatible with all professional video heads with diameters of 100 mm. In addition, we offer suitable 100 mm diameter leveling unit capabel of taking any tilt head as required. With leg spread stops at 20°, 35°, 55° and 80°.
These tripod is ideal for filming assignments and is compatible with all professional video heads with diameters of 75 mm. In addition, we offer suitable 75 mm diameter leveling unit capabel of taking any tilt head as required. With leg spread stops at 20°, 35°, 55° and 80°.
Light-metal mounting head with spring-loaded retaining spindle. Diameter of the support area 160 mm. Without leg spread stops. The maximum height given below is that at an approx. 20° leg spread.
Light-metal mounting head with spring-loaded retaining spindle. Diameter of the support area 160 mm. Without leg spread stops. The maximum height given below is that at an approx. 20° leg spread.
Light-metal mounting head with levelling ball up to 30° tilt and circular bubble. Ball with friction adjustment. Diameter of the support area 100 mm. Spring-loaded retaining spindle. Without leg spread stops. The maximum height given below is that at an approx. 20° leg spread.