The tripod Report 823 is equipped with the module insert 2, i.e. with a centre column which has a length of 50 cm and a diameter of 25 mm, made of precision-drawn light-metal tubing which ensures an easy height adjustment. The support plate made of aluminium has a diameter of 68 mm and is equipped with a fixed fastening screw (size to be selected) as well as three locking screws which secure the mounted system against unintentional loosening. When using an extra-short centre column (10 cm), it is possible to work near ground level. The specified maximum height applies if the 50 cm centre column is extended. Double tripod leg extension. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.
On the occasion of our 120th anniversary, we produce a limited edition of 120 pieces of this high-grade tripod made of high-quality walnut wood and hand-polished brass fittings. This high-quality tripod is a real eye-catcher in the upscale living environment. The tripod has a double tripod leg extension and a 37 cm center column. Despite the high-grade optics this tripod is state-of-the-art technology and flexible and expandable by the modular system. The lightweight magnesium mounting head is also the module base for 14 different uses. It is possible at any time to change the module insert by the means of a special key (enclosed with delivery of the exchange module). The fixation of the cone ensures a positive-locking, backlash-free connection of the components. With the stop system, the leg spread of 20 °, 40 °, 60 °, 80 ° and 100 ° can be adjusted by the means of a wing lock. The stop system is designed that way, that the specified load of the tripod is guaranteed, even at maximum spread of the tripod legs.
Tripod with crankle column Stativ mit Moduleinsatz Kurbelsäule Länge der Mittelsäule: 50 cm Verstellweg: 41 cm Befestigungsgewinde: 3/8" Der leichte Schenkelkopf aus Magnesium ist gleichzeitig die Modulbasis für 10 verschiedene Einsätze. Es ist jederzeit möglich, den Moduleinsatz wahlweise mittels Spezialschlüssel (wird bei Lieferung des Wechselmoduls beigelegt) zu wechseln. Die Fixierung im Konus gewährleistet eine formschlüssige, spielfreie Verbindung der Komponenten. Mit dem neuen Anschlagsystem können Spreizwinkel bei ca. 20°, 40°, 60°, 80° und 100° mittels Flügelraster eingestellt werden. Das Anschlagsystem ist so ausgelegt, dass die angegebenen Belastungen der Stative auch bei maximaler Spreizung der Stativbeine gewährleistet ist. Das Stativ Report 322/K ist mit Moduleinsatz 2K ausgestattet, d.h. mit einer 50 cm langen Kurbelmttelsäule, Durchmesser 25 mm x 3 mm aus präzisionsgezogenerm Leichtmetallrohr, so daß eine bequeme Höhenverstellung möglich ist. Der Auflageteller aus Aluminium hat einen Durchmesser von 68 mm und ist mit einer feststehenden Befestigungsschraube 3/8" sowie drei Sicherungsschrauben gegen unbeabsichtigtes Lösen der montierten Technik versehen. Die angegebene Maximalhöhe ist gemessen mit ausgezogener Mittelsäule. Zweifacher Stativbeinauszug.
Mounting head with centre column and fastening screw. Centre column gives additional convenient height adjustment. Column from wood or plastic. Thanks to the new stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.
Like models 823 except that centre column has a non-removable rotating panorama plate. Especially suitable for ball heads without a built-in rotation plate. Double leg extension.
The tripod Report 833 is equipped with the module insert 3, i.e. with a permanently installed levelling ball, a diameter of 55 mm and a spirit level. This enables a quick and precise adjustment of the tripod. The pivoting range is 30° in all directions. The fastening screw is spring-loaded. Place your tilt head or your camera down and fasten it from below by means of the star knob screw. This module insert is particularly suitable for heavy equipment, because the integrated ball partly allows the work without additional tilt head. The lens or the camera is fastened directly on the tripod. Since there is only one connection between the tripod and the camera, this is the most stable and the safest method. Double tripod leg extension. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.
Das Stativ Report 833/130 ist mit Moduleinsatz 3/130 ausgestattet. Das Modul 3/130 hat eine fest eingebaute Nivellierkugel, Durchmesser 55 mm und Dosenlibelle. Somit ist ein schnelles und genaues Ausrichten des Stativs möglich. Der Schwenkbereich beträgt 30° in alle Richtungen. Zusätzlich mit fest verbauter Schnellkupplung 130 mit Durchmesser 70 mm incl. Wechselplatte 57 mm Länge (andere Längen an Wechselplatten s. Zubehör) - die Schnellkupplung hat ein integriertes Sicherheitssystem (funktioniert nur mit Berlebach Schnellwechselplatten) gegen das versehentliche Herrausrutschen der Schnellwechselplatte aus der geöffneten Klemme. Entsichert wird über den roten Knopf an der Seite der Basis - auch für Schwalbenschwanzplatten anderer Hersteller (Arca-Swiss, Novoflex, Burzynski) geeignet - integrierte Dosenlibelle Dieser Moduleinsatz ist besonders bei schwerer Ausrüstung zu empfehlen, da man mit der eingebauten Kugel teilweise auch ohne zusätzlichen Neiger arbeiten kann. Das Objektiv bzw. die Kamera wird direkt auf dem Stativ befestigt. Dies stellt die stabilste und sicherste Methode dar, da nur eine Verbindung zwischen Stativ und Kamera vorhanden ist. Der leichte Schenkelkopf aus Magnesium ist gleichzeitig die Modulbasis für 20 verschiedene Einsätze. Es ist jederzeit möglich, den Moduleinsatz wahlweise mittels Spezialschlüssel (wird bei Lieferung des Wechselmoduls beigelegt) zu wechseln. Die Fixierung im Konus gewährleistet eine formschlüssige, spielfreie Verbindung der Komponenten. Mit dem Anschlagsystem können Spreizwinkel bei ca. 20°, 40°, 60°, 80° und 100° mittels Flügelraster eingestellt werden. Das Anschlagsystem ist so ausgelegt, dass die angegebenen Belastungen der Stative auch bei maximaler Spreizung der Stativbeine gewährleistet ist. Dieses Stativ hat die mittlere Beinlänge mit zweifachem Stativbeinauszug.
The light magnesium mounting head serves as module basis for 10 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the new stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs. The tripod Report 833/P is equipped with the module insert 3/P, i.e. with a permanently installed levelling ball, a diameter of 55 mm ,spirit level and an integr. panorama plate. This enables a quick and precise adjustment of the tripod. The pivoting range is 30° in all directions. The fastening screw is spring-loaded. Place your tilt head or your camera down and fasten it from below by means of the star knob screw. This module insert is particularly suitable for heavy equipment, because the integrated ball partly allows the work without additional tilt head. The lens or the camera is fastened directly on the tripod. Since there is only one connection between the tripod and the camera, this is the most stable and the safest method. Double tripod leg extension.
The tripod Report 843 is equipped with the module insert 4, i.e. with a centre column which has a length of 50 cm and a diameter of 25 mm, made of precision-drawn light-metal tubing, and a levelling ball. The centre column is additionally equipped with a rotating panorama plate. By means of the centre column, the levelling ball can be tilted by 30° in all directions. The support plate made of aluminium has a diameter of 68 mm and is equipped with a fixed fastening screw (size to be selected) as well as three locking screws which secure the mounted system against unintentional loosening. The spirit level ensures a quick and precise adjustment. When using an extra-short centre column (10 cm), it is possible to work near ground level. Double tripod leg extension. The specified maximum height applies if the centre column with a length of 50 cm is extended. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the new stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs. best pick)]
The tripod Report 843/K is equipped with the module insert 4K, i.e. with a crank centre column which has a length of 50 cm and a diameter of 25 mm, made of precision-drawn light-metal tubing, and a levelling ball. The centre column is additionally equipped with a rotating panorama plate. By means of the centre column, the levelling ball can be tilted by 30° in all directions. The support plate made of aluminium has a diameter of 68 mm and is equipped with a fixed fastening screw (size to be selected) as well as three locking screws which secure the mounted system against unintentional loosening. The spirit level ensures a quick and precise adjustment. Double tripod leg extension. The specified maximum height applies if the centre column with a length of 50 cm is extended. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.
Like tripod Report 843 except that centre column has a non-removable rotating panorama plate. Especially suitable for ball heads without a built-in rotation plate. These are top-of-the-line tripods that deliver perfect results in any conditions. For many work assignments there is no need to use a tripod head. Extremely convenient when working on uneven ground. Double leg extension.
Mounting head with permanent 2 D pan/tilt attachment. The pan/tilt attachment being firmly mounted on the tripod provides outstanding stability. Photo head model 520 width sliding camera teaining screw. Double leg extension.