Berlebach

View as Grid List
Sort by
Display
The tripod Report 202 is equipped with the module insert 0 and is thus the simplest and cheapest tripod version. The support area has a diameter of 60 mm and is equipped with a fixed fastening screw (size to be selected). In combination with our tripod heads, it can be used for various applications and is particularly suitable for near-ground-level work. Single tripod leg extension. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.
234.00 €
Estimated delivery time : 2-3 days
 
 
The tripod Report 212 is equipped with the module insert 1. This has a spring supported fastening screw 1/4", 3/8" or 5/8". It is suitable for the simple mounting of heavy heads or devices. the head is put on and is connected to the tripod by turning the screw. Single tripod leg extension. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.
269.00 €
Estimated delivery time : 2-3 days
 
 
The tripod Report 222 is equipped with the module insert 2, i.e. with a centre column which has a length of 50 cm and a diameter of 25 mm, made of precision-drawn light-metal tubing which ensures an easy height adjustment. The support plate made of aluminium has a diameter of 68 mm and is equipped with a fixed fastening screw (size to be selected) as well as three locking screws which secure the mounted system against unintentional loosening. When using an extra-short centre column (10 cm), it is possible to work near ground level. The specified maximum height applies if the 50 cm centre column is extended. Single tripod leg extension. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.
292.00 €
Estimated delivery time : 2-3 days
 
 
Like models 222 except that centre column has a non-removable rotating panorama plate. Especially suitable for ball heads without a built-in rotation plate. Single leg extension.
326.00 €
Estimated delivery time : 2-3 days
 
 
The tripod Report 232 is equipped with the module insert 3, i.e. with a permanently installed levelling ball, a diameter of 55 mm and a spirit level. This enables a quick and precise adjustment of the tripod. The pivoting range is 30° in all directions. The fastening screw is spring-loaded. Place your tilt head or your camera down and fasten it from below by means of the star knob screw. This module insert is particularly suitable for heavy equipment, because the integrated ball partly allows the work without additional tilt head. The lens or the camera is fastened directly on the tripod. Since there is only one connection between the tripod and the camera, this is the most stable and the safest method. Single tripod leg extension. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the new stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.
309.00 €
Estimated delivery time : 2-3 days
 
 
THE NEW MODULAR REPORT TRIPOD SYSTEM The light magnesium mounting head serves as module basis for 10 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the new stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs. The tripod Report 232/P is equipped with the module insert 3/P, i.e. with a permanently installed levelling ball, a diameter of 55 mm ,spirit level and an integr. panorama plate. This enables a quick and precise adjustment of the tripod. The pivoting range is 30° in all directions. The fastening screw is spring-loaded. Place your tilt head or your camera down and fasten it from below by means of the star knob screw. This module insert is particularly suitable for heavy equipment, because the integrated ball partly allows the work without additional tilt head. The lens or the camera is fastened directly on the tripod. Since there is only one connection between the tripod and the camera, this is the most stable and the safest method. Single tripod leg extension.
427.00 €
Estimated delivery time : 2-3 days
 
 
The tripod Report 242 is equipped with the module insert 4, i.e. with a centre column which has a length of 50 cm and a diameter of 25 mm, made of precision-drawn light-metal tubing, and a levelling ball. The centre column is additionally equipped with a rotating panorama plate. By means of the centre column, the levelling ball can be tilted by 30° in all directions. The support plate made of aluminium has a diameter of 68 mm and is equipped with a fixed fastening screw (size to be selected) as well as three locking screws which secure the mounted system against unintentional loosening. The spirit level ensures a quick and precise adjustment. When using an extra-short centre column (10 cm), it is possible to work near ground level. Single tripod leg extension. The specified maximum height applies if the centre column with a length of 50 cm is extended. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.
376.00 €
Estimated delivery time : 2-3 days
 
 
The tripod Report 242/K is equipped with the module insert 4K, i.e. with a crank centre column which has a length of 50 cm and a diameter of 25 mm, made of precision-drawn light-metal tubing, and a levelling ball. The centre column is additionally equipped with a rotating panorama plate. By means of the centre column, the levelling ball can be tilted by 30° in all directions. The support plate made of aluminium has a diameter of 68 mm and is equipped with a fixed fastening screw (size to be selected) as well as three locking screws which secure the mounted system against unintentional loosening. The spirit level ensures a quick and precise adjustment. Single tripod leg extension. The specified maximum height applies if the centre column with a length of 50 cm is extended. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.
556.00 €
Estimated delivery time : 2-3 days
 
 
Like tripod Report 242 except that centre column has a non-removable rotating panorama plate. Especially suitable for ball heads without a built-in rotation plate. These are top-of-the-line tripods that deliver perfect results in any conditions. For many work assignments there is no need to use a tripod head. Extremely convenient when working on uneven ground. Single leg extension.
434.00 €
Estimated delivery time : 2-3 days
 
 
Mounting head with permanent 2 D pan/tilt attachment. The pan/tilt attachment being firmly mounted on the tripod provides outstanding stability. Photo head model 520 width sliding camera teaining screw. Single leg extension.
348.00 €
Estimated delivery time : 2-3 days
 
 
Mounting head with permanent 2 D pan/tilt attachment. The pan/tilt attachment being firmly mounted on the tripod provides outstanding stability. Video head model 520 Video with spring-loaded video-pin and thread 1/4". Single leg extension.
341.00 €
Estimated delivery time : 2-3 days
 
 
The tripod Report 262 is equipped with the module insert 6, i.e. with a half ball with a diameter of 75 mm for the direct insertion of professional video tilt heads or a levelling unit (available as an accessory). The half ball ensures a pivoting range of 15° in all directions which leads to a quick and precise tripod adjustment. The levelling unit is fastened my means of the 80-mm wooden handle or the star knob. Single tripod leg extension. The light magnesium mounting head serves as module basis for 14 different inserts. The module insert can be changed at all times using a special wrench (included in the delivery of the changing module). The fixation in the cone ensures a positive-locking, clearance-free connection of the components. Thanks to the stop system, it is possible to set angles of spread at approx. 20°, 40°, 60°, 80° and 100° by means of a wing catch. The stop system is designed in such a way that the specified loads of the tripods are also guaranteed at a maximum inclination of the tripod legs.
233.00 €
Estimated delivery time : 2-3 days