Berlebach

Clamp Element for attachment to the tripod legs of the system REPORT and Mini-Tripods. Easy and quick installation with just one clamping lever (no screwing required). You are able to screw directly a compact camera or umbrella. The angle for levelling is 35°. Diameter of the plate: 30 mm Load capacity: 4 kg

Clamp Element for attachment to the tripod legs of the system UNI and PLANET. Easy and quick installation with just one clamping lever (no screwing required). You are able to screw directly a compact camera or umbrella. The angle for levelling is 35°. Diameter of the plate: 30 mm Load capacity: 4 kg

Clamp Element for attachment to the tripod legs of the system REPORT and Mini-Tripods. Easy and quick installation with just one clamping lever (no screwing required). You are able to screw directly a compact camera, ball- head or the plate # 320517. The angle for levelling is 35°. Diameter of the plate: 30 mm Load capacity: 4 kg

Clamp Element for attachment to the tripod legs of the system UNI and PLANET. Easy and quick installation with just one clamping lever (no screwing required). You are able to screw directly a compact camera, ball- head or the plate # 320517 or a tablet. The angle for levelling is 35°. Diameter of the plate: 68 mm screw bolt: 3/8" Load capacity: 4 kg

All in One! The complete solution for the panoramic photography. Fold, swivel, take photos. The folding and swivelling elbow is the newest innovation by Berlebach. A product which convinces in torsional stiffness and resilience. It excels in compactness and with the fact that it is built up within seconds. All in One! The complete solution for the panoramic photography. Fold, swivel, take photos. The folding and swivelling elbow is the newest innovation by Berlebach. A product which convinces in torsional stiffness and resilience. It excels in compactness and with the fact that it is built up within seconds. Since it is a Multi-Row panorama head, spherical panoramas are no problem for the MR 190. The horizontal plane (X-axis) is characterized by a functional scale which simplifies the alignment of the camera. The vertical plane is aligned at 90° by a snap-in element when the device is tilted up, and is clamped backlash-free via a wing nut. A 15° snap-in stage had been designed for the adjustment of the nodal rail. A big hand wheel allows with little rotating movements an exact positioning and fixation at the same time, whereat also the safety of your equipments had been considered and a hasty unintended tilting is prevented. The camera connection is constituted by the coupling model 110, which can be retained via a coin slot screw and moreover can be shifted by 90°. When you loosen this screw, it is possible to adjust the Z-axis, which must be adapted objective-specific in order to determine the nodal point. The small number of operating elements provides clearness and contributes to intuitive usage. - vertical 15° scaling - Camera connection with quick-release coupling model 110 - Notches for saving weight - Scaling for aligning the camera on the X-Axis - ultra-stable - Exact fixation of the vertical axis - Large adjustment ranges (also suitable for full format with large objectives) - Z-axis with adjustment range of 105 mm / 4.1 inch - Load capacity: 5,00 kg = 11 lb.

- Angels of tilt up to 33° - Ball diameter 100 mm - Camera support plate dia. 75 mm - screw 3/8" - height 110 mm - Adjustable friction - Fits 85 mm and 70 mm diam. bowl sizes and 3/8" screw

Levelling Unit With Lock Screw (Diameter 100 mm)

Levelling Unit With Lock Screw (Diameter 75 mm)

Instead of the flat tripod connection with a diameter of 86 mm and 3/8" screw hole you can mount this levelling unit with 15°.

Instead of the flat tripod connection with a diameter of 86 mm and 3/8" screw hole you can mount this levelling unit with 15°.

The leveling foot allows for easy and precise fine-tuning of the tripod. This means that each mount can be perfectly leveled once set up. The large diameter of 98 mm prevents sinking into soft ground, providing good load-bearing capacity and additional stability. The thread has an adjustment range of 25 mm. It is attached to the tripod with a round rubber. The plate is made of aluminum, and the mount for the tripod leg is made of stainless steel. Price is for 3 pcs. [LINK=https://youtu.be/BzoMipxDZis]

Neigung 20° Höhe: 39 mm Auflagefläche: 55 mm Befestigungsschraube 3/8" belastbar bis 10 kg Drehmoment: 10 Nm Maße ohne Griff: 62 x 72 x 41 mm Maße mit Griff: 71 x 109 x 41 mm