Altair Astro
Altair Astro manufacturer of high quality astronomical accessories
Manufacturer in England of high quality accessories and distribution of CCD cameras. APM is a partially authorized dealer for Germany.
The Altair Hypercam from QHY offers the highest standard for astrophotography with the new 16bit Sony IMX571 sensor in APS-C format
2419.00 €
Estimated delivery time : 2-4 weeks
The fan-cooled Hypercam 294C Colour camera is the preferred alternative to a DSLR camera when it comes to astro-imaging, due to it's higher sensitivity to Hydrogen Alpha light.
1199.00 €
Estimated delivery time : 2-4 weeks
The TEC-cooled Hypercam 294C Colour camera has a Thermoelectric cooling system for extremely low noise imaging.
1499.00 €
Estimated delivery time : 2-4 weeks
Altair AA533CTEC has a 14bit Sony IMX533 Back Side Illuminated Sensor with very high sensitivity.
989.00 €
Estimated delivery time : 2-4 weeks
Hypercam AA533MTEC headlines:
- 9-megapixel Sony IMX533 back-illuminated sensor with 16mm diagonal
- 14bit ADC delivers 16,384 grey levels in the image
- Zero Amp Glow even at 10 minutes exposure
- Special Ultra Low Read Noise mode
- True hardware binning
- 2 stage TEC cooling
- Heated optical window
- 2 year warranty, with no sensor freeze guarantee**.
- USB3.0/USB2.0 connection with rear USB2.0 hub (2x ports)
- 12V power is required to operate this camera.
- Armoured case included
- Supplied basic 240~110v compatible 12v DC power supply with choice of UK, USA or EU plug
- Software & drivers downloadable from www.altairastro.help
1349.00 €
Estimated delivery time : 3-4 weeks
Feature summary Altair Hypercam 585C CMOS Camera:
- TEC cooling with heatsink for extra low noise
- On board temperature sensor for perfect dark frame calibration.
- 5A 12v DC Power supply included, with 110-240v input.
- IMX585 Colour 8.3mp Starvis 2 Back Illuminated CMOS Sensor
- On-chip HGC, LCG and HDR Support
- 3840 x 2160 pixel resolution
- 2.9 um Square Pixels
- 1/1.2-inch Optical Format
- Sensor size: 11.14 x 6.26 mm (12.85mm Diagonal)
- 12-bit ADC (with 16bit output in HDR mode)
- 512Mbyte DDR3 Memory buffer
- Low Noise: 0.65 to 0.5e- in HCG mode
- Fast Frame Rate 47 FPS in 8bit mode
- Binning from 1x1 to 8x8 in either stacking or averaging modes.
799.00 €
Estimated delivery time : 3-4 weeks
Feature summary Altair Hypercam 585C CMOS Camera:
- 5A 12v DC Power supply included, with 110-240v input.
- IMX585 Colour 8.3mp Starvis 2 Back Illuminated CMOS Sensor
- On-chip HGC, LCG and HDR Support
- 3840 x 2160 pixel resolution
- 2.9 um Square Pixels
- 1/1.2-inch Optical Format
- Sensor size: 11.14 x 6.26 mm (12.85mm Diagonal)
- 12-bit ADC (with 16bit output in HDR mode)
- 512Mbyte DDR3 Memory buffer
- Low Noise: 0.65 to 0.5e- in HCG mode
- Fast Frame Rate 47 FPS in 8bit mode
- Binning from 1x1 to 8x8 in either stacking or averaging modes.
579.00 €
Estimated delivery time : 3-4 weeks
Feature summary Altair Hypercam 585M CMOS Camera:
- TEC cooling with heatsink for extra low noise
- On board temperature sensor for perfect dark frame calibration.
- 5A 12v DC Power supply included, with 110-240v input.
- IMX585 Mono 8.3mp Starvis 2 Back Illuminated CMOS Sensor
- On-chip HGC, LCG and HDR Support
- 3840 x 2160 pixel resolution
- 2.9 um Square Pixels
- 1/1.2-inch Optical Format
- Sensor size: 11.14 x 6.26 mm (12.85mm Diagonal)
- 12-bit ADC (with 16bit output in HDR mode)
- 512Mbyte DDR3 Memory buffer
- Low Noise: 0.65 to 0.5e- in HCG mode
- Fast Frame Rate 47 FPS in 8bit mode
- Binning from 1x1 to 8x8 in either stacking or averaging modes.
839.00 €
Estimated delivery time : 3-4 weeks
The Altair M48 tilt adjuster is designed to give the perfect image field by making the CCD or DSLR camera sensor completely orthogonal to the telescope's optical axis.
82.00 €
Estimated delivery time : 1 week
Attach your Altair Hypercam camera to a Nikon photographic lens for wide-field astrophotography
159.00 €
Estimated delivery time : 1-4 weeks
Attach your Altair Hypercam camera to a Nikon photographic lens for wide-field astrophotography
159.00 €
Estimated delivery time : 2-4 weeks
Connects an Altair Hypercam PRO FAN cooled camera to an existing Hypercam Nikon lens adapter
39.00 €
Estimated delivery time : 1-4 weeks
