Please note: Last regular shipment before Christmas is on December 19, 2024, after which only express shipments can be sent. Our store is closed on Christmas Eve and New Year's Eve. (Close)
Altair Astro manufacturer of high quality astronomical accessories Manufacturer in England of high quality accessories and distribution of CCD cameras.APM is a partially authorized dealer for Germany.
A premium dielectric coated diagonal which is small and compact with
very high quality machining and a super-hard black anodised chassis and
red anodised sides.
A premium dielectric coated diagonal which is small and compact with
very high quality machining and a super-hard black anodised chassis and
red anodised sides.
This field flattener is designed to work with the Altair 115ED Triplet
Wave Series Refractor with M63 2.5" CNC Focuser. It has an M48 rear
thread adaptor for connecting your DSLR or CCD camera.
This reducer - flattener is designed to work with the Altair Astro Wave Series 115mm EDT-X FPL53 102mm F7 Super ED Triplet APO.
It consists of two components:
The flattener body containing the optics, with M92 male outer
thread on the telescope side and M72 female inner thread on the camera
side
An M72 to M48 adaptor-spacer with M72 male outer thread on the
flattener side and M48 male outer thread on the camera side. The adaptor
has a 21.62mm optical length, to give 55mm sensor to flange distance.
Capture the two main emission nebulae bands at the same time, whilst suppressing light pollution, moonlight, and airglow.
Acquire more data in less time, opening up your imaging window, even into the summer months when it isn't quite dark.
If you have the 6nm Ha/Sii Ultra filter and the Sii/Ha version, you
can capture twice the Oiii data in each imaging session and combine
them for true SHO Hubble style imaging with a colour camera!
Extremely steep bandpass yields maximum contrast in extreme light
pollution: 6nm FHWM centred on 500.7nm Oiii wavelength, and 5.5nm FHWM
centred on the 656.28nm Ha wavelength.
Halo suppression anti-reflective coating.
Can be used with One Shot Colour (OSC) CMOS or mono astronomical cameras for luminance data.
Includes UVIR blocking for both modified and un-modified DSLR
cameras, plus an anti-reflection coating for the ultimate in contrast.
Best performance at focal ratios at F4.8 or slower, however can be
used as fast as F3.6, with minimal contrast impact (conservative
estimate - faster may be possible). Like any dichroic filter, contrast
increases as focal ratio number increases. More info about light pollution filter performance and focal ratio here.
Capture the two main emission nebulae bands at the same time, whilst suppressing light pollution, moonlight, and airglow.
Acquire more data in less time, opening up your imaging window, even into the summer months when it isn't quite dark.
If you have the 6nm Sii Oiii Ultra filter and the Ha Oiii
version, you can capture twice the Oiii data in each imaging session and
combine them for true SHO Hubble style imaging with a colour camera!
Extremely steep bandpass yields maximum contrast in extreme light
pollution: 6nm FHWM centred on 500.7nm Oiii wavelength, and 5.5nm FHWM
centred on the 671.6nm Sii wavelength.
Halo suppression anti-reflective coating.
Can be used with One Shot Colour (OSC) CMOS or mono astronomical cameras for luminance data.
Includes UVIR blocking for both modified and un-modified DSLR
cameras, plus an anti-reflection coating for the ultimate in contrast.
Best performance at focal ratios at F4.8 or slower, however can be
used as fast as F3.6, with minimal contrast impact (conservative
estimate - faster may be possible). Like any dichroic filter, contrast
increases as focal ratio number increases. More info about light pollution filter performance and focal ratio here.
Anti-Halo coating on both surfaces to reduce reflection artefacts from reducers and camera lenses.
Increased blocking of UV, IR and unwanted visual range wavelengths. UV OD7 (T0.00001%) Visual OD5 (T0.001%) and IR OD4 (T0.01%) for the ultimate in skyglow blocking. This is an order of magnitude better than foreign filters.
Higher transmission % of desired wavelengths Ttop 93% (Average 5% higher transmission of target wavelengths than V1). In general a 5% gain on foreign filters.
Ha at 14nm and Oiii at 34nm FWHM for with less tail-off to reduce unwanted light pollution, whilst keeping transmission high compared to the V1.
The Altair Astro 60mm finder also has many more features than your average finder scope:
This finder is right angled for more comfort, with a corrected field
(i.e. not mirror-reversed like other finders), so objects actually
match their orientation in your star chart.
The focuser can also be rotated 360° and locked in seconds
(requiring some re-alignment afterwards). The 10mm larger objective and a
little extra power compare to 8x50 finders, yet has almost the same
size and weight.
The included quick-release finder base has 4x 4mm slotted holes in
the base allowing you to fit it to most telescopes on the market. (The
mini-dovetail wedge on the bracket will fit any GSO or Skywatcher
telescope directly in fact but we suggest you use the included base if
it fits the tube, because it has 2x clamping screws, for better
alignment).
The CNC machined bracket is light yet rigid to keep alignment. Nylon
tipped screws do not damage the durable high quality and moisture
resistant powder coated aluminium tube.
All objective lenses are anti-reflection coated and the tube and
dewshield are internally blackened to increase contrast. The included
illuminator has a variable setting, which illuminates the cross hairs in
the eyepiece. The included eyepiece has a dark field illuminated
cross-hair, so you can easily see it glowing faintly against the
background sky, an upgrade for standard finders with dark cross-hairs.
The high quality 1.25 FMC illuminated eyepiece has good eye relief
for glasses-wearers, and a wide field of view. It has a side-port to
screw in the included variable darkfield illuminated reticule, and the
finder can be very easily focused, using the included helical focuser
integrated with the prism diagonal.
The Altair Dichroic Solar Energy Rejection Filter or D-ERF protects your
telescope and solar imaging equipment from excessive heat build-up when
solar imaging or observing with your Daystar Hydrogen Alpha Quark, or
other Hydrogen Alpha Etalon filters.